Smok

Smok Mag V8 70W Kit

As low as £23.45
In stock
Only %1 left
SKU
Smok Mag V8 70W Kit

The Smok Mag V8 Mod in the kit continues the comfortable grip style shape and portable design of the preceding mag mods. The device measures 91.3mm x 59.5mm x 38.7mm and is made from stainnless steel.

Powering the Mag V8 is a single 21700 battery for long vaping times. And, the device is also compatible with a less portable 20700 or 18650 cell. The battery is loaded via a bottom loaded tray which is similar to inserting a magazine into a gun. Recharges can be done via an easily accessed micro USB port. Firmware upgrades also take place via this interface.

Output tops out at 70 watts. Atomizer minimum resistance comes in at 0.05ohm.

With measurements of 30mm x 54mm, this TFV8 Baby V2 has a bulb shaped juice reservoir. Refills of the atomizer is performed by engaging a lock button on the top cap which rotates to access an e-liquid slot. The gasket on the fill port is located on the bottom to ensure that refills are leak proof.

An upgraded airflow system at the bottom is built with a total of three air inlets. The dimensions of the air slots make it wider for massive vapor production. Airflow works in combination with a 16mm Delrin drip tip to resist heat and improve flavor and vapor.

The Smok TFV8 Baby V2 has unique coil heads that are built with medical grade cotton for health. One of these is built with a mesh heating element for intense vapor. It works from 90 to 140 watts, but is recommended at 110 to 130 watts. Also in the package is a 0.2ohm Baby V2 A2 dual coil. It is said to produce huge vapor and works in the range of 50 to 80 watts.

 

FEATURES:

  • Mod Dimensions: 91.3mm x 59.5mm x 38.7mm
  • Tank Measurements: 30mm x 54mm
  • Color options: unknown
  • Power Range: 1W-70W
  • Output Voltage: 3.4V-4.2V
  • Micro USB Charging Voltage: 5V
  • Temperature Range: 200 F–600 F /100C–315C
  • Resistance Range: 0.1Q-2.5Q (VW)/ 0.05Q-2Q (TC)
  • 2ml capacity
  • Swiveling top cap exposes juice port
  • Patented lock
  • Gasket at bottom for appearance and leak prevention
  • Three wide air slots – fully adjustable
  • 510 threaded tank connection
  • 16mm wide bore cobra drip tip
  • New coil system
  • Pre-installed: 0.17ohm Baby V2 A1
  • Included: 0.2ohm Baby V2 A2

 

WHAT'S IN THE BOX:

  • 1 x SMOK Mag V8 Mod
  • 1 x SMOK TFV8 Baby V2 Tank
  • 1 x Baby V2 S1 0.15ohm Coil (Pre-installed)
  • 1 x Baby V2 S2 0.15ohm Coil (Included)
  • 1 x Replacement Glass Tube
  • 1 x USB Cable
  • 1 x 18650 Battery Adapter
  • 1 x User Manual
  • Spare Parts
More Information
BrandSmok
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Delivery:

 

Our aim is to get your products to you as quickly as possible. We aim to get all orders placed before 1pm dispatched the same day (Monday to Friday excluding public holidays) with the exception of Monday where this is not always possible due to order volumes.

Please note that delivery times stated are calculated from the point of dispatch rather than when the order was placed.

Delivery options and prices will be calculated and displayed at checkout. You can select the required service from there.

Please note, we cannot accept responsibility for parcels that go missing using the Royal mail (UNTRACKED) service. No replacements or refunds will be provided in these cases.

We use third party couriers to delivery your orders such as Royal Mail, Hermes, Yodel, DPD and DHL.

 On rare occasions packages may be subject to delay, damage or loss. If this is the case, then please get in touch with us as soon as possible as we will not be notified until you have brought the situation to our attention.

Once your order has been dispatched you will receive an email confirmation containing the shipment tracking number (if you have opted for a tracked service).

In the unlikely event that you have not received your order within the estimated delivery time we kindly request that you wait a further 4 working days before reporting it to us. Occasionally courier services can experience some unexpected delays, which unfortunately we have no control over.

International Clients: Please note that it is your responsibility to check for tax and custom related costs. You are advised to check the destination countries law in relation to importing electronic cigarette products such as import taxes, duties, and compliance before placing orders. Some countries not permit the import of electronic cigarette products or may require licences or permits. Evape will not be held responsible for products rejected, held or confiscated by customs.

 

Returns:

 

Please make sure to include your order number, order date and name in any correspondence. Contact should be made either through the contact us page on our website or by sending an email to sales@evape.com. Please provide as much information as possible including pictures where applicable to speed up the process of resolving your issue.

If you have received an item that was damaged in transit you must notify us within 24 hours of delivery.

Errors or shortages must me notified within 24 hours of delivery.

In the event you have received a faulty item you must notify us with 30 days of arrival.

If you have changed your mind and no longer require the purchased item, you must notify us with 30 days delivery. In this instance we can only accept returns if the items are in brand new and unused condition and the buyer will be liable for return costs.

If the returned product is not in the condition in which it was posted, we reserve the right to issue a partial refund after assessing the item for damages.

We provide warranty for all products up to 90 days from the date of purchase, except for e-liquids, cbd, coils and clearance items, for which warranty does not apply.

Damaged and faulty items must be returned to us for inspection. Return labels will be provided for faulty products however we are unable to cover return costs for accidental orders or buyers changing their mind.

Please do not send items back without receiving authorisation from us. This could result in the loss of your items for which we will not be held liable.

It is essential that when returning items, you package them correctly. You will be liable for any damages caused to items in return transit if packaged incorrectly.

To Top