Aspire Cleito 120 Pro Tank - 2ml TPD Edition

The Aspire Cleito 120 Pro tank is a refillable 2ml tank in the UK TPD edition, supplied with a 0.15Ω mesh coil already fitted and a second 0.16Ω coil in the box. It suits vapers who already use refillable tanks and want a compact 25mm tank with a wide-bore drip tip and simple top filling.

Key features

• 2ml capacity (TPD edition)
• 0.15Ω mesh coil pre-installed, rated at 60-75W
• Cleito 120 coil at 0.16Ω included, rated at 100-120W
• Top side-fill slot, no need to unscrew the tank
• Triple slot bottom airflow, adjustable
• Wide-bore, curved Delrin drip tip
• 25mm diameter and 52mm overall height
• Enlarged wicking holes, intended to keep the tank breathing freely when chain vaping

Aspire describes the Cleito 120 Pro as suited to vapers who like dense flavour, especially with the mesh coil. The airflow is controlled by the triple slots at the base, so you can set it to your own preference. The top ring slides up to reveal the fill slot, which makes refilling quick and tidy.

What's in the box

• 1 x 2ml Cleito 120 Pro tank
• 2 x coils (1 x 0.16Ω and 1 x 0.15Ω mesh)
• 6 x O-rings
• 1 x user manual
• 1 x warranty card

Compatibility

This tank uses the Cleito 120 0.15Ω mesh coil and the Cleito 120 0.16Ω coil. Both coils supplied are also compatible with the original Cleito 120 tank.

Choosing your colour

The Cleito 120 Pro is available in three colours: Gold, Rainbow and Silver. The tank is the same whichever you choose.

How to use

1. Unscrew the top section, including the drip tip, and check a coil is fitted. To swap coils, unscrew the old one and screw in the new one.
2. Let a new coil stand for a few minutes so the wick can soak up e-liquid before you vape.
3. Slide the top ring up to show the fill slot marked with three dots. Keep the dots uppermost while filling to avoid spills, then close the ring.
4. Set the airflow using the slots at the base, and stay within the wattage range for the coil you are using.

FAQs

Which coil is fitted when the tank arrives?

The 0.15Ω mesh coil comes pre-installed. The 0.16Ω Cleito 120 coil is included separately.

What wattage should I use?

The 0.15Ω mesh coil is rated at 60-75W and the 0.16Ω coil at 100-120W. Use the range for the coil that is fitted.

How much e-liquid does it hold?

This UK TPD edition holds 2ml.

How do I fill it?

Slide up the top ring, fill through the slot marked with three dots and keep the dots facing upwards as you fill. You do not need to unscrew the tank.