Freemax X Mesh Coils 0.15 Ohm X4 Quad Mesh - Pack of 5

Freemax X Mesh coils are replacement tank coils for the FireLuke M and FireLuke 2 tank. This pack of 5 uses the 0.15 ohm X4 Quad Mesh design, so you have spares ready when a coil needs changing.

Key features

• Type: X4 Quad Mesh
• Resistance: 0.15 ohm
• Power range: 40-80W
• Recommended power: 70W
• Wicking formula: 90% flax cotton and 10% cotton
• Pack of 5 coils

The coils are rated for 40-80W, and Freemax recommends 70W. If you are not sure where to begin, 70W is the sensible starting point. You can adjust within the stated range to suit your taste. The wick is made from a blend of 90% flax cotton and 10% cotton.

Compatibility

These Freemax X Mesh coils fit the FireLuke M and FireLuke 2 tank. Check which tank you have before ordering.

How to use

1. Remove the old coil from the tank and fit the new coil firmly in its place.
2. Add a few drops of e-liquid directly to the wick openings, then fill the tank.
3. Leave the new coil to soak for a few minutes before you first use it.
4. Take a few gentle puffs before moving up to your usual power, staying within 40-80W.

Change the coil when the flavour fades or tastes burnt, and never fire a coil that has run dry.

FAQs

Which tanks do these coils fit?

They fit the FireLuke M and FireLuke 2 tank.

What power should I use?

The coils are rated for 40-80W, and 70W is the recommended setting.

How many coils come in a pack?

Each pack contains 5 Freemax X Mesh coils.

Do I need to prime a new coil?

Yes. Put a few drops of e-liquid on the wick and let the coil soak for a few minutes before use. This helps stop it burning.