Geek vape Aegis Boost B100 21700 Pod Kit - 2ml Pod, 100W

The Geek vape Aegis Boost B100 21700 pod kit brings the Aegis Boost Pro pod system to a single 21700 battery device. It suits vapers who want a rugged, adjustable pod vape with up to 100W output and a refillable 2ml pod.

Key features

• Single 21700 battery (not included), up to 100W output
• Output power 5-100W, resistance range 0.1Ω-3.0Ω
• 2ml Aegis Boost Pro pod with a 0.2Ω P Series coil (60-70W) pre-installed
• Upgraded Gen 2 three-inlet airflow control
• 0.96 inch TFT colour screen
• Temperature control range 200°F-600°F
• Type-C charging (USB-C 5V/2A), with the battery charged inside the device
• IP67 rating: IP6X dust resistance, water resistance and shock resistance
• Shell made from plastic, silicone, leather and zinc alloy
• Dimensions 49.17 x 33 x 121.90mm

The kit is powered by one external 21700 battery, which you will need to buy separately. You can charge it in the device through the Type-C port, or charge it externally and swap it in. An 18650 battery adapter is included in the box if you would rather use an 18650 cell. Technical limits are input voltage 3.2-4.25V, output voltage 0.8-8.5V and a longest vaping time of 10 seconds per puff.

The Aegis Boost Pro pod uses Geek vape's P Series coils, and the airflow control ring has three air inlets.

What's in the box

• 1 x B100 21700 kit (2ml)
• 1 x drip tip
• 2 x Geek vape P Series coils (pre-installed 0.2Ω 60-70W, spare 0.4Ω 50-60W)
• 1 x coil tool
• 1 x USB Type-C cable
• 1 x spare parts pack
• 1 x 18650 battery adapter

Compatibility

• Pods: Aegis Boost Pro pod (GVAEGBOPROP), Aegis Boost Plus pod (GVAEGBOPLUSP) and the Aegis Pro & Plus 510 adapter
• Coils: GVPCOIL for the Pro pod (the default coil) and GVAEGBOC for the Plus pod

The kit comes with the Pro pod. The Plus pod and the 510 adapter are sold separately.

Choosing your colour

• Almighty Blue
• Aura Glow
• Classic Silver
• Devil Red

All four colours are the same kit with the same specification.

How to use

1. Fit a charged 21700 battery, observing the polarity markings.
2. Fill the pod with e-liquid, avoiding the airflow openings. Let a new coil soak for a few minutes before first use.
3. Set the power to suit the installed coil and adjust the airflow ring to your preference.
4. Recharge through the Type-C port when the battery runs low.

FAQs

Is a battery included?

No. You need one 21700 battery. An 18650 adapter is in the box if you prefer to use an 18650 cell.

How big is the pod?

The UK version of this kit has a 2ml pod.

Which coils does it use?

The Pro pod uses the GVPCOIL P Series coil. A 0.2Ω coil is pre-installed and a 0.4Ω spare is included. The Plus pod uses the GVAEGBOC coil.

How do I charge it?

Use the included Type-C cable and the port on the device. You can also charge the battery externally.

Is it water and dust resistant?

It carries an IP67 rating, with IP6X dust resistance and shock resistance. It is still an electronic device, so treat it with care.