Geek vape Aegis Eteno E100 Pod Mod Kit - 100W, 2ml Pod

The Geek vape Aegis Eteno E100 pod mod kit pairs a 100W single 18650 mod with a leakproof 2ml top airflow pod. It suits vapers who want a durable, pocketable refillable pod vape with proper wattage control rather than a basic fixed-output device.

Key features

• Up to 100W output (5W to 100W range)
• Powered by one replaceable external 18650 battery (not included)
• AS Chip 3.0 with Smart, Power, Boosting, VPC and temperature control modes
• IP68 rating for water and dust resistance, with improved shock resistance
• 2ml top-fill pod with adjustable top airflow
• 1.06-inch colour screen
• USB Type-C port
• Silicone grip; 39.56 x 33.00 x 134.50mm

The E100 pod fills from the top, so you can add e-liquid without taking it off the mod, and the airflow control on the top lets you set a tighter or looser draw. Smart mode picks a suitable output for the coil you have fitted and lets you set a maximum limit. The pod is made from PCTG plastic. The mod accepts coil resistances from 0.1 to 3 ohm.

What's in the box

• 1 x E100 mod
• 1 x E100 2ml pod
• 2 x Geek Vape P Series coils: 0.2 ohm (pre-installed, rated 60-70W) and 0.4 ohm (spare, rated 50-60W)
• 1 x coil tool
• 1 x spare parts pack
• 1 x USB cable (Type-C)

An 18650 battery is not included, so you will need to buy one separately.

Compatibility

The kit uses the E100 2ml pod and Geek Vape P Series coils. The pod can be switched to a tank set-up using a 510 magnetic adapter, which is sold separately and not part of the kit.

Choosing your colour

The E100 is available in Beige, Black, Blue, Rainbow, Red and Volcanic Grey. The specification is the same whichever you choose.

How to use

1. Fit a suitable, undamaged 18650 battery, observing the polarity markings.
2. Fill the pod through the top fill port and let the new coil soak for a few minutes before first use.
3. Switch on, choose a mode and set your airflow.
4. Start at a lower output and adjust to taste, staying within the coil's rated range.

FAQs

Is the battery included?

No. The E100 needs one 18650 battery, which is not included.

Is the pod refillable?

Yes. It is a 2ml top-fill pod, so you can refill it without removing it from the device.

Can I use it as a tank?

The pod can be converted to a tank with a 510 magnetic adapter. The adapter is sold separately.

Is it water resistant?

The E100 has an IP68 rating for water and dust resistance. Keep the charging port and battery door properly closed in wet or dusty conditions.