IJoy X3 Replacement Tank Coils - Various Resistances

These IJoy X3 coils are replacement tank coils designed for iJoy's newer series of tanks, including the Avenger Sub-Ohm tank. They suit anyone running one of those tanks who wants to keep a spare set ready or pick a different coil configuration.

Key features

• Made for iJoy's newer tank series, including the Avenger Sub-Ohm tank
• Four options: 0.15 Ohm Mesh, 0.3 Ohm C2, 0.4 Ohm C1 and X3 RBA
• Packs of 3 coils, with the RBA supplied as a single
• Wattage range stated for each of the three ready-made coils
• The 0.15 Ohm Mesh coil uses a wood pulp and cotton blend

Each ready-made coil has its own recommended wattage range, so check the figure for the one you choose and set your device to match. The Mesh coil is the one the manufacturer describes as a wood pulp and cotton blend.

Compatibility

X3 coils are designed for iJoy's newer series of tanks, including the Avenger Sub-Ohm tank. If you are unsure whether your tank takes X3 coils, check the tank's name or packaging before ordering.

Choosing your coil resistance

• 0.15 Ohm Mesh (X3-Mesh) - 40-90W, wood pulp and cotton blend. Pack of 3.
• 0.3 Ohm C2 (X3-C2) - 60-100W. Pack of 3.
• 0.4 Ohm C1 (X3-C1) - 60-90W. Pack of 3.
• X3 RBA - the rebuildable option, supplied as a single rather than a pack of 3.

How to use

1. Switch off your device and unscrew the tank in line with the tank's instructions.
2. Remove the old coil and fit the new one firmly.
3. Fill the tank and let a new coil soak for a few minutes before first use so the wick is fully saturated.
4. Set the power within the range stated for your coil and take a few gentle puffs to begin.

FAQs

Will these fit the iJoy Avenger tank?

Yes, the Avenger Sub-Ohm tank is named as one of the tanks these X3 coils are designed for.

How many coils come in a pack?

The Mesh, C2 and C1 options come as a pack of 3. The X3 RBA is supplied as a single.

What wattage should I use?

Stay within the stated range for your coil: 40-90W for the 0.15 Ohm Mesh, 60-100W for the 0.3 Ohm C2 and 60-90W for the 0.4 Ohm C1.

Do I need to prime a new coil?

It is good practice with any new coil. Add e-liquid and leave it to soak for a few minutes before vaping.