Innokin CoolFire P60 Pod Vape Kit - 60W 3200mAh

The Innokin CoolFire P60 pod vape kit is a refillable pod vape built around a 3200mAh battery and up to 60W of output. It suits vapers who want a pod kit that lasts through the day and comes with two pod resistances in the box.

Key features

• 3200mAh battery with Titan battery tech
• USB-C charging at 5V/2A
• Output up to 60W, with stable output as the battery drains
• 0.69-inch OLED display
• Side airflow control
• Manual lock on the fire button
• Replaceable pods with built-in, non-replaceable coils
• Device size with pod: 22.65 x 39.99 x 113.6mm

The large battery and 2A USB-C charging are the main selling points, and the output is designed to stay consistent as the battery level falls. The manual lock stops accidental presses when the device is in a pocket or bag, and the OLED screen gives you quick access to wattage and battery information. The body is made from zinc alloy, PCTG and leather.

What's in the box

• 1 x CoolFire P60 device
• 1 x 0.8Ω pod (installed, 2ml)
• 1 x 0.4Ω pod (spare, 2ml)
• USB-C cable
• User guide

Compatibility

The kit uses CoolFire P60 pods. The 0.8Ω pod is designed for a tighter mouth-to-lung draw, while the 0.4Ω pod gives a warmer, more open restricted direct-to-lung style. A 0.6Ω pod is also available separately, as are replacement pods.

Choosing your colour

The CoolFire P60 comes in six colours: Blue Silver Gradient, Light Purple, Matte Black, Orange, Pale Pink and Pearl White. The specification is the same whichever you choose.

How to use

1. Fill the pod with your e-liquid and leave it for a few minutes so the coil can soak before first use.
2. Fit the pod to the device and make sure it is seated firmly.
3. Press the fire button and draw gently. Adjust the side airflow control to suit.
4. Use the manual lock when the device is not in use.
5. Recharge through the USB-C port with the cable provided.

FAQs

Does the Innokin CoolFire P60 come with two pods?

Yes. A 0.8Ω pod is installed and a spare 0.4Ω pod is included. Both hold 2ml.

Can I replace the coil?

No. The coil is built into the pod, so you replace the whole pod when it is time for a change.

How is it charged?

Through the USB-C port at 5V/2A, using the cable in the box.

Does it have a lock?

Yes, the fire button has a manual lock to prevent accidental firing.