Innokin CoolFire PZPulse Pod Mod Vape Kit - 80W 2400mAh

The Innokin CoolFire PZPulse pod mod vape kit is a compact DTL device built around a tough, IP68-rated body. It suits vapers who want a pod-style kit with plenty of battery and an adjustable output of up to 80W, and who need something that copes with being carried around daily.

Key features of the Innokin CoolFire PZPulse pod mod kit

• Power adjustable from 6W to 80W
• 2400mAh built-in battery
• USB-C charging at 5V/2A, reaching 80% in about an hour
• IP68 rating for water and dust resistance
• Manual locking switch
• 0.96-inch full-curved TFT screen
• Top-fill pod with top airflow control and a magnetic connection
• Plug-and-play PZP Max coils
• Zinc alloy body, PCTG pod, 119 x 43.77 x 30.58 mm

The manual locking switch shuts the device down completely, so accidental button presses in a pocket or bag will not fire it. The smart chip is designed to hold a stable voltage output even when the battery runs low. On the pod, top-fill makes refilling quick, and the top airflow design and four silicone seals are there to keep leaks in check.

Compatibility

The PZPulse uses PZP Max coils, available in 0.2Ω, 0.4Ω and 0.6Ω. These push-fit plug-and-play coils make changing a coil quick and tidy. The PZPulse is the first device built for the PZP Max coil.

Choosing your colour

The kit comes in five colours: Black, Blue / Green, Gun Metal, Purple Gradient and Silver.

How to use

1. Fit a PZP Max coil and let it soak in e-liquid for a few minutes before first use.
2. Fill the pod through the top opening and clip it onto the device.
3. Slide the lock switch to on, then set your power and adjust the airflow at the top of the pod.
4. Slide the lock off when you have finished, especially before putting the device in a bag.

FAQs

Is the PZPulse waterproof?

It carries an IP68 rating for water and dust resistance, and its construction is also described as shock resistant.

How do I charge it?

Through the USB-C port at 5V/2A. The manufacturer states about an hour to reach 80%.

Which coils does it take?

PZP Max coils, in 0.2Ω, 0.4Ω and 0.6Ω.

How do I fill the pod?

The pod fills from the top. Remove the pod from the device, fill it, then reattach it magnetically.