Innokin Endura APEX Pen Kit - 1800mAh, 2ml Prism S Tank

The Innokin Endura APEX pen kit is a refillable mouth-to-lung starter kit built around a 1800mAh internal battery and a 2ml top-fill tank. It suits vapers who want a pen-style device with adjustable airflow, a choice of two power levels and a mesh coil already fitted.

Key features

• Built-in 1800mAh battery (20500 cell, 3.7V)
• 2ml e-liquid capacity
• Prism S mesh coil system, with a 0.9ohm coil pre-installed
• Two power levels, 14.5W and 16.5W, shown by coloured LEDs
• Adjustable airflow for mouth-to-lung (MTL) vaping
• Top-fill design with a twist-off cap
• USB-C charging, with a battery level indicator
• Stainless steel body in a satin finish, 22mm diameter

You change power by turning the cap at the base of the device, so there is no button sequence to learn. The airflow control lets you set a tighter draw or open it up to a looser one, which also gives more vapour at the looser setting. Refilling is done from the top: twist off the cap and fill the tank. The device charges over USB-C, and Innokin build in circuit protections.

What's in the box

• 1 x Endura APEX kit (0.9ohm Prism S coil installed)
• 1 x spare Prism S coil (0.8ohm)
• 1 x spare O-ring set
• 1 x Type-C USB cable
• 1 x quick guide
• 1 x warning booklet

Compatibility

This kit uses Innokin Prism S coils. It ships with a 0.9ohm coil fitted and a 0.8ohm spare.

Choosing your colour

The Innokin Endura APEX is available in six colours: Black, Blue, Grey, Green, Pink and Purple. All have the same satin finish and the same specification, so choose whichever you prefer.

How to use

1. Twist off the top cap and fill the tank with e-liquid, taking care not to overfill. Do not exceed 2ml.
2. Refit the cap and leave a new coil to soak for a few minutes before first use.
3. Turn the base cap to choose your power level and set the airflow to suit your draw.
4. Charge through the USB-C port when the battery indicator shows it is running low.

FAQs

Is the Endura APEX a mouth-to-lung kit?

Yes. It has an adjustable airflow system designed for MTL vaping, from a tighter draw to a looser one.

How much e-liquid does the tank hold?

The UK version has a 2ml tank, filled from the top.

How do I charge it?

Use the USB-C port. A Type-C cable is included in the box.

Which coils does it take?

It uses Prism S coils. A 0.9ohm coil is fitted and a spare 0.8ohm Prism S coil is included.