Innokin Endura T20-S Battery Mod - 1500mAh

The Innokin Endura T20-S battery mod is a compact, pen-style device built around a 1500mAh internal battery and a 510 connector. It suits vapers who want a simple, self-contained power unit to pair with their own 510 tank, with a clear LED indicator so you always know where the charge stands.

Key features

• 1500mAh internal Li-Po battery
• Integrated safety protection
• 'Vape while charging' technology
• Tri-colour LED power indicator showing remaining power and charging status
• 18W maximum output, 6A maximum output current and 3.85V maximum output voltage
• 510 thread connector
• Clearomizer resistance of 0.6 ohm minimum
• Micro USB charging at 5V/0.5A

The LED works on three colours: green for a full battery, yellow for roughly half and red when power is low. Because the mod supports vaping while it charges, you are not left waiting if the battery runs down. Keep the 0.6 ohm minimum resistance in mind when choosing a tank or coil, as anything lower falls outside the stated range.

What's in the box

• 1x Endura T20-S mod
• 1x Micro USB charging cable
• 1x Quick Start Guide
• 1x User packet

Compatibility

The mod has a 510 connector, so it takes tanks and atomisers with a 510 thread whose resistance is 0.6 ohm or higher.

Choosing your colour

The Endura T20-S is available in six colours:

• Black
• Dark Blue
• Grey
• Purple
• Red
• Stainless Steel

The specification is the same whichever colour you pick, so it comes down to personal taste.

How to use

1. Charge the mod fully with the supplied Micro USB cable before first use.
2. Fill your tank, fit a coil that has had time to soak, and screw the tank onto the 510 connector.
3. Check the LED indicator to see the remaining charge.
4. Recharge when the light turns red.

Read the Quick Start Guide for button operation before you start.

FAQs

Can I vape while the mod is charging?

Yes. The Endura T20-S features 'vape while charging' technology.

What does the LED colour mean?

Green indicates a full battery, yellow indicates about half and red indicates low power. The light also shows charging status.

How do I charge it?

Use the Micro USB cable in the box. The charging input is listed as 5V/0.5A.

What connector does it have?

A 510 connector, with a stated minimum clearomizer resistance of 0.6 ohm.

Does it come with a tank?

No tank is listed in the box contents, so you will need a suitable 510 tank.