Innokin Endura T22E Vape Kit - 2000mAh, 2ml Tank

The Innokin Endura T22E vape kit is a compact, one-button kit built around a 2000mAh internal battery and a 2ml refillable T18E tank. It is designed for mouth-to-lung vaping and suits existing vapers who want a straightforward, easy-to-fill setup without a lot of settings to learn.

Key features

• Internal 2000mAh battery, charged by Micro USB
• Pass-through charging, so you can vape while it charges
• Optimised at 14W with 1.5 Ohm coils
• 2ml T18E tank in stainless steel and Pyrex glass, with a matching Delrin mouthpiece
• Replaceable T18E coils using Japanese organic cotton wicking
• No-spill coil swap system
• One-button operation
• Integrated safety protection against overheating and over-discharge

The Endura T22E is a simple device. There is one button, and the output is optimised at 14W for the 1.5 Ohm coils, so there is little to adjust. The tank fills by turning the top section and adding your e-liquid, and the glass and steel construction is easy to rinse out when you change flavour. Coil changes are designed to be clean, thanks to the no-spill swap system.

Charging is by standard Micro USB at 5V/1A. Because the kit supports pass-through charging, you can carry on using it while it is plugged in.

Compatibility

The kit uses Innokin T18E coils (also listed as Prism T18E). The coils are replaceable, and the 1.5 Ohm coil is the one the kit is optimised for.

Choosing your colour

The Endura T22E is available in 12 colours:

• Black
• Blue
• Green
• Grey
• Light Purple
• Pink
• Purple
• Rainbow
• Red
• Silver
• Sky Blue
• Yellow

The colour is a cosmetic choice. The battery, tank and coils are the same whichever you pick.

How to use

1. Turn the top of the tank to open it and fill with your e-liquid, taking care not to overfill.
2. Let a new coil soak for a few minutes before first use so the wick is saturated.
3. Press the button and draw gently on the mouthpiece.
4. Recharge through the Micro USB port when the battery runs low.

FAQs

Can I use the Endura T22E while it is charging?

Yes. The kit has pass-through charging, so it can be used while connected to a charger.

How do I charge it?

Use a standard Micro USB cable. The manufacturer lists charging at 5V/1A.

Which coils does it take?

It uses Innokin T18E coils. The 1.5 Ohm coil is the one the kit is optimised for at 14W.

How much does the tank hold?

The T18E tank holds 2ml and is filled by turning the top section.

Is it a mouth-to-lung kit?

Yes. It is designed to give a mouth-to-lung vape.