Innokin Endura V Box Pod Vape Kit - 1400mAh 30W

The Innokin Endura V Box pod kit is a compact, refillable pod vape built around a 1400mAh internal battery and adjustable power up to 30W. It suits vapers who want a pocket-sized device with a proper colour screen and the option to change wattage, rather than a fixed-output kit.

Key features

• 1400mAh internal battery, charged by USB-C at 5V/1A
• Adjustable power from 6W to 30W
• 0.99 inch TFT colour screen
• 30-second auto-lock protection
• Uses VCAP pods with a 2ml e-liquid capacity
• Top refilling
• 3-hole airflow control on the bottom of the pod
• Magnesium alloy and PCTG construction
• Removable magnetic design panel

The screen shows battery level, charging status, wattage, puff timer, resistance, voltage and a puff counter, so you can see what the device is doing without guessing. To change the power, take off the magnetic panel and use the plus and minus buttons. After 30 seconds without use the fire button locks automatically; pick the device up and vape to unlock it. Innokin quotes about four days of vaping per charge, though how long it lasts will depend on how you use it.

The Endura V Box measures 52 x 89.1 x 20.3mm with a pod fitted, so it slips into a small pocket or bag easily.

Compatibility

This kit uses Innokin VCAP pods, which have mesh coils and refill from the top. Innokin lists VCAP pods in 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω resistances, and describes the range as covering MTL to RDL vaping. Pods are 2ml, which is the UK limit.

Choosing your colour

There are two colours: Black and Silver. The kit has a colour base and a removable magnetic panel, so you can run it with the panel fitted or removed for a different look.

How to use

1. Charge the device fully with a USB-C cable before first use.
2. Remove the top cap of the VCAP pod, fill with e-liquid without covering the airflow or going past the fill line, and replace the cap.
3. Fit the pod and let it soak for a few minutes so the coil is saturated before your first puff.
4. Remove the magnetic panel and use the plus and minus buttons to set your wattage, then refit the panel.
5. Replace the pod when the flavour becomes dull or burnt.

FAQs

Which pods does the Endura V Box use?

It uses Innokin VCAP pods. Innokin lists 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω versions.

How do I refill the pod?

Remove the top cap, fill the pod with e-liquid and put the cap back. There is no need to take the pod out of the device.

Can I change the power?

Yes. Power is adjustable from 6W to 30W. Take off the magnetic panel and press the plus and minus buttons.

How is it charged?

Through the USB-C port, with a 5V/1A charging specification.