Innokin Kroma-Z 40W Pod Mod Kit - 3000mAh

The Innokin Kroma-Z 40W pod mod kit is a refillable pod vape built around the Z-Coil range, aimed at existing Zenith, Zenith Pro and Zlide users who want a smaller device. It pairs a 3000mAh internal battery with adjustable output up to 40W and a 2ml pod.

Key features of the Innokin Kroma-Z pod mod kit

• 3000mAh internal battery with USB Type-C charging rated at 1.7A
• Wattage adjustable from 6W to 40W
• Automatic coil detection, with a suggested wattage to suit the coil fitted
• 2ml pod, filled from the side without removing it from the device
• Magnetic pod connection with a locking tab
• External airflow slider, plus an extra airflow ring at the base of the coil
• Magnesium alloy body with a side-mounted firing bar, styled after the Kroma-R
• Supported resistance range of 0.2 to 3.5 ohm

The Kroma-Z reads the resistance of the coil you fit and suggests a suitable wattage, so you are not left guessing at setup. The airflow slider moves from a tight MTL draw to a more open RDL draw, and the airflow ring can be switched to an MTL precision ring for a tighter draw still. The magnesium alloy body keeps the weight down while adding strength.

Compatibility

The Kroma-Z is designed to work with the whole Z-Coil line (formerly Zenith coils). Innokin lists these Z-Coils and their suggested power ranges:

• 0.3 ohm mesh: 30W to 40W, RDL
• 0.48 ohm mesh: 12W to 16W, MTL
• 0.5 ohm mesh: 12W to 16W, MTL
• 0.8 ohm: MTL
• 1.0 ohm: 20W to 25W, RDL
• 1.2 ohm: 10W to 14W, MTL
• 1.6 ohm: 10W to 14W, MTL

A 510 adapter is sold separately. Fit it in place of the pod and the Kroma-Z becomes a mod that runs Zenith, Zenith Pro, Zlide or other 510-compatible tanks.

Choosing your colour

The Kroma-Z comes in six colours: Black, Grey, Midnight Blue, Midnight Green, Pink and White. The specification is the same whichever you pick.

How to use

1. Fit a coil in the pod and let it soak in e-liquid for a few minutes before first use.
2. Fill the pod through the side fill tab, up to the 2ml capacity, and avoid overfilling.
3. Check the suggested wattage for your coil and adjust if needed.
4. Set the airflow slider to suit your preferred draw, then use the firing bar.
5. To remove the pod, push up against the fill tab.

FAQs

Does the Kroma-Z work with Z-Coils?

Yes. Innokin states it is fully compatible with the whole Z-Coil line.

How much e-liquid does the pod hold?

The pod holds 2ml.

How do I charge it?

Use a USB Type-C cable. Charging is rated at 1.7A.

Can I use it with a tank?

Yes, with the separate 510 adapter. It replaces the pod and lets you use Zenith, Zenith Pro, Zlide or other 510-compatible tanks.