Innokin Liftbox Bastion Siphon Mech Box Mod - Single 18650

£72.99
In stock
SKU
INKLIFTBOX
  • Semi-regulated mechanical box mod with LIFT Siphon system
  • Single replaceable 18650 battery (not included)
  • Unregulated output for builds from 0.1Ω, with 0.08Ω cut-off
  • Side-firing button, LED battery indicator, microUSB charging
  • Finished in black with carbon fibre side and replaceable side panel

The Innokin Liftbox Bastion Siphon box mod is a semi-regulated mechanical mod built around the LIFT Siphon system, which feeds the coils automatically with every puff. It is aimed at experienced vapers and builders who already understand Ohm's Law and want a bottom-feed set-up in a single 18650 box.

Key features

  • LIFT Siphon system that automatically saturates the coils with each puff
  • Integrated glass tank that you fill internally
  • Semi-regulated mechanical design with unregulated output for builds from 0.1Ω and above
  • Protections: short circuit, low voltage, reverse polarity and a 0.08Ω cut-off
  • Side-firing button
  • Replaceable side panel and carbon fibre side finish
  • LED indicator for remaining battery level
  • Charges via microUSB, or remove the battery and use an external charger
  • Available in black

The Liftbox is designed to keep things tidy. You fill the internal tank, fit an RDA with a bottom feed pin, prime the coils and fire with the side button. Because the output is unregulated, the result depends on your build and your battery, so this is a device for people who are confident working that out themselves.

Compatibility

The Liftbox takes an RDA with a bottom feed pin. It runs on one 18650 battery, which is not included.

How to use

  1. Fit a suitable, correctly charged 18650 battery.
  2. Fill the internal tank with e-liquid.
  3. Attach an RDA with a bottom feed pin.
  4. Prime the coils so the wick is wet before you fire.
  5. Squeeze the side-firing button to vape.

Always check your build resistance before use, and use a battery suited to the load.

FAQs

Is the battery included?

No. You need to supply one 18650 battery.

How do I charge it?

Through the microUSB port, or by taking the battery out and using an external charger. The LED shows the remaining power level.

Is it suitable for beginners?

No. It is an unregulated mechanical device intended for experienced vapers and builders who understand Ohm's Law.

Do I need an RDA?

Yes. You attach an RDA with a bottom feed pin, and the siphon system feeds the coils from the internal tank.

More Information
ManufacturerInnokin
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Delivery:

 

Our aim is to get your products to you as quickly as possible. We aim to get all orders placed before 1pm dispatched the same day (Monday to Friday excluding public holidays) with the exception of Monday where this is not always possible due to order volumes.

Please note that delivery times stated are calculated from the point of dispatch rather than when the order was placed.

Delivery options and prices will be calculated and displayed at checkout. You can select the required service from there.

Please note, we cannot accept responsibility for parcels that go missing using the Royal mail (UNTRACKED) service. No replacements or refunds will be provided in these cases.

We use third party couriers to delivery your orders such as Royal Mail, Hermes, Yodel, DPD and DHL.

 On rare occasions packages may be subject to delay, damage or loss. If this is the case, then please get in touch with us as soon as possible as we will not be notified until you have brought the situation to our attention.

Once your order has been dispatched you will receive an email confirmation containing the shipment tracking number (if you have opted for a tracked service).

In the unlikely event that you have not received your order within the estimated delivery time we kindly request that you wait a further 4 working days before reporting it to us. Occasionally courier services can experience some unexpected delays, which unfortunately we have no control over.

International Clients: Please note that it is your responsibility to check for tax and custom related costs. You are advised to check the destination countries law in relation to importing electronic cigarette products such as import taxes, duties, and compliance before placing orders. Some countries not permit the import of electronic cigarette products or may require licences or permits. Evape will not be held responsible for products rejected, held or confiscated by customs.

 

Returns:

 

Please make sure to include your order number, order date and name in any correspondence. Contact should be made either through the contact us page on our website or by sending an email to sales@evape.com. Please provide as much information as possible including pictures where applicable to speed up the process of resolving your issue.

If you have received an item that was damaged in transit you must notify us within 24 hours of delivery.

Errors or shortages must me notified within 24 hours of delivery.

In the event you have received a faulty item you must notify us with 30 days of arrival.

If you have changed your mind and no longer require the purchased item, you must notify us with 30 days delivery. In this instance we can only accept returns if the items are in brand new and unused condition and the buyer will be liable for return costs.

If the returned product is not in the condition in which it was posted, we reserve the right to issue a partial refund after assessing the item for damages.

We provide warranty for all products up to 90 days from the date of purchase, except for e-liquids, cbd, coils and clearance items, for which warranty does not apply.

Damaged and faulty items must be returned to us for inspection. Return labels will be provided for faulty products however we are unable to cover return costs for accidental orders or buyers changing their mind.

Please do not send items back without receiving authorisation from us. This could result in the loss of your items for which we will not be held liable.

It is essential that when returning items, you package them correctly. You will be liable for any damages caused to items in return transit if packaged incorrectly.

To Top