Product added to cart
Innokin SIDERA Zenith M Vape Kit - 60W DNA60C Chip
£213.99
In stock
Only %1 left
SKU
INKSIDZENMK
- Evolv DNA60C chipset with colour screen, 1W to 60W output
- Supplied with the 24mm Zenith M tank; accepts atomisers up to 24mm
- Takes one 18650 battery (not included)
- Side-by-side design with dual fire buttons
- Uses INKZEN coils; available in Black, Bronze or Stainless Steel
The Innokin SIDERA Zenith M kit is a side-by-side box mod vape kit built around the Evolv DNA60C chip and paired with the 24mm Zenith M tank. It suits experienced vapers who like a customisable colour screen, a wide power range and the option of temperature control.
Key features
- Evolv DNA60C chipset with colour screen
- Output from 1W to 60W, voltage range 0.2V to 9V
- Temperature control from 200-600°F / 93-316°C with a compatible coil material such as stainless steel
- Side-by-side layout with dual fire buttons
- Aluminium alloy body with leather accents
- Single user-replaceable 18650 battery, fitted through a threaded top cap
- Accepts coil resistances from 0.1Ω to 3Ω
- Protections: reverse polarity, overheat, low resistance, short circuit, timeout and temperature
The SIDERA is part of the PLATFORM Series, designed by P. Busardo and Vapingreek. The DNA60C chip gives you a clear colour display of your settings, and Escribe software lets you customise and monitor the device from a home computer. The device measures 81.0 x 53.9 x 31.2mm and charges at 5V/1A through the device itself.
Compatibility
The kit comes with the 24mm Zenith M tank (24 x 50.70mm), which uses INKZEN coils. Z-Coil 0.8Ω is listed for 15-18W and Z-Coil 0.3Ω for 30-40W. The mod will also take other tanks and atomisers up to 24mm in diameter. An 18650 battery is required and is not included.
Choosing your colour
- Black
- Bronze
- Stainless Steel
All three colours are the same kit, so choose whichever finish you prefer.
How to use
- Fit a suitable, fully charged 18650 battery, observing the correct orientation, and secure the top cap.
- Fill the tank and let a new coil soak for a few minutes before first use.
- Set your power or temperature control mode on the screen, then press either fire button.
FAQs
Is the battery included?
No. The kit needs one 18650 battery, which you will need to buy separately.
Which tanks fit the SIDERA?
The Zenith M tank is supplied with the kit, and the mod accepts atomisers up to 24mm in diameter.
Does it have temperature control?
Yes. It covers 200-600°F / 93-316°C and works with a compatible coil material such as stainless steel.
What is the maximum power?
The output range is 1W to 60W.
Can I update the firmware?
The DNA60C supports Escribe software, which you can use from a home computer to customise and monitor the device.
| Manufacturer | Innokin |
|---|
Write Your Own Review
Delivery:
Our aim is to get your products to you as quickly as possible. We aim to get all orders placed before 1pm dispatched the same day (Monday to Friday excluding public holidays) with the exception of Monday where this is not always possible due to order volumes.
Please note that delivery times stated are calculated from the point of dispatch rather than when the order was placed.
Delivery options and prices will be calculated and displayed at checkout. You can select the required service from there.
Please note, we cannot accept responsibility for parcels that go missing using the Royal mail (UNTRACKED) service. No replacements or refunds will be provided in these cases.
We use third party couriers to delivery your orders such as Royal Mail, Hermes, Yodel, DPD and DHL.
On rare occasions packages may be subject to delay, damage or loss. If this is the case, then please get in touch with us as soon as possible as we will not be notified until you have brought the situation to our attention.
Once your order has been dispatched you will receive an email confirmation containing the shipment tracking number (if you have opted for a tracked service).
In the unlikely event that you have not received your order within the estimated delivery time we kindly request that you wait a further 4 working days before reporting it to us. Occasionally courier services can experience some unexpected delays, which unfortunately we have no control over.
International Clients: Please note that it is your responsibility to check for tax and custom related costs. You are advised to check the destination countries law in relation to importing electronic cigarette products such as import taxes, duties, and compliance before placing orders. Some countries not permit the import of electronic cigarette products or may require licences or permits. Evape will not be held responsible for products rejected, held or confiscated by customs.
Returns:
Please make sure to include your order number, order date and name in any correspondence. Contact should be made either through the contact us page on our website or by sending an email to sales@evape.com. Please provide as much information as possible including pictures where applicable to speed up the process of resolving your issue.
If you have received an item that was damaged in transit you must notify us within 24 hours of delivery.
Errors or shortages must me notified within 24 hours of delivery.
In the event you have received a faulty item you must notify us with 30 days of arrival.
If you have changed your mind and no longer require the purchased item, you must notify us with 30 days delivery. In this instance we can only accept returns if the items are in brand new and unused condition and the buyer will be liable for return costs.
If the returned product is not in the condition in which it was posted, we reserve the right to issue a partial refund after assessing the item for damages.
We provide warranty for all products up to 90 days from the date of purchase, except for e-liquids, cbd, coils and clearance items, for which warranty does not apply.
Damaged and faulty items must be returned to us for inspection. Return labels will be provided for faulty products however we are unable to cover return costs for accidental orders or buyers changing their mind.
Please do not send items back without receiving authorisation from us. This could result in the loss of your items for which we will not be held liable.
It is essential that when returning items, you package them correctly. You will be liable for any damages caused to items in return transit if packaged incorrectly.
Innokin CoolFire Z80 NEX Vape Kit - 80W with Zenith M Tank Previous

