Lost Vape Centaurus N100 Box Mod - 100W, 21700 / 18650

The Lost Vape Centaurus N100 box mod is a compact single-battery mod with a 100W maximum output and a 0.96 inch TFT screen. It suits vapers who already run their own tank or atomiser and want adjustable power in a small body with a replaceable translucent shell.

Key features

• 100W maximum output, with a 5-100W power range
• Single 21700 or 18650 battery (not included)
• QUEST 2.0 chip
• 0.96 inch TFT display showing real-time settings
• Jog dial interface for adjusting wattage and changing modes
• On/off toggle switch
• Replaceable translucent matte panel
• Supports coil resistances from 0.1 ohm to 3.0 ohm
• Body made from PC, zinc-alloy and stainless steel

The screen shows your current settings as you use the mod, and it has a separate layout for normal mode and RBA mode, so it is easy to see what you are set to. Power is adjusted with the jog dial, and the one-step toggle switch turns the mod on or off with a single push. The battery voltage range is 3.0-4.2V, and the mod charges over USB Type-C at 5V/2A.

It measures 97.6 x 38 x 30mm and weighs around 53g (plus or minus 5g) without a battery, so it is easy to carry.

What's in the box

• 1 x Centaurus N100 Box Mod
• 1 x 18650 Battery Adapter
• 1 x User Manual
• 1 x USB Type-C Cable
• 1 x Warranty Card

A battery is not included, so you will need to buy a suitable 21700 or 18650 cell separately.

Choosing your colour

The shell designs take their tones from rocks, thunder and waves. There are four to choose from:

• Blue Thunder
• Blue Waves
• Grey Rock
• Pink Waves

All four have the same specification. Only the look of the panel changes.

How to use

1. Fit a charged 21700 or 18650 battery. If you use an 18650, use the supplied adapter.
2. Attach your tank or atomiser, making sure the coil resistance falls within the supported range.
3. Switch the mod on with the toggle switch.
4. Set your wattage with the jog dial, starting low and adjusting up gradually.

Always use a battery from a reputable maker that is rated for the output you are using, and let a new coil soak in e-liquid before its first use.

FAQs

Does the Centaurus N100 come with a battery?

No. It takes one 21700 or 18650 battery, which you buy separately. An 18650 battery adapter is included in the box.

Does it come with a tank?

No. This is a box mod only, so you will need your own tank or atomiser.

What coil resistance does it support?

The manufacturer lists a supported coil resistance of 0.1 ohm to 3.0 ohm.

Can I change the shell?

The translucent matte panel is replaceable, so the look can be customised.

How do I charge it?

Charging is through the USB Type-C port at 5V/2A, using the cable supplied.