Lost Vape Galaxy S360 Pod Vape Kit - 35W 1400mAh

The Lost Vape Galaxy S360 pod vape kit is a compact, pebble-style device with a wraparound 360° screen lit by 300 micro LEDs. It pairs a 1400mAh battery and up to 35W output with top-fill URSA V3 pods, and suits adult vapers who want a pocketable refillable pod kit with a bit of visual character.

Key features

• 360° Galaxy LED screen with 300 micro LEDs placed behind the curved housing
• 1400mAh internal battery
• Output from 5W up to 35W
• URSA Cartridge V3 top-fill pods
• Side slider to adjust draw resistance (airflow)
• Single button for power on/off, screen wake/sleep and power-saving mode
• USB Type-C charging
• Open circuit, short circuit, overtime and low battery protections

The screen wraps around the device and shows status at a glance. Operation is kept simple: one integrated button handles power, screen and power-saving mode through short and long presses, while the side slider lets you set the airflow to suit you. Charging is via USB Type-C at 5V/1.2A, and the device also supports a 5V/2A charger. The supported coil range is 0.35Ω to 2.5Ω.

What's in the box

• 1 × Galaxy S360 device
• 1 × URSA V3 top-fill 0.8Ω pod (2ml)
• 1 × Lanyard
• Quick guides and warranty card

Compatibility

The Galaxy S360 uses URSA Cartridge V3 pods in 0.6Ω (RDL), 0.8Ω (MTL) and 1.0Ω (MTL) options. Only the 0.8Ω pod is supplied in the box, so pick up any other resistance separately.

Choosing your colour

• Ignite Galaxy
• Mystic Galaxy

Both colours are the same device with the same specification, so the choice is down to looks.

How to use

Charge the device before first use. Fill the pod through the top-fill port with e-liquid, leave it a few minutes so the wick can soak, then insert it into the device. Use the button to switch on, and adjust the side slider to set your airflow. Do not overfill the pod, and keep the device charged using a suitable Type-C cable.

FAQs

What pods does the Galaxy S360 use?

It uses URSA Cartridge V3 pods in 0.6Ω, 0.8Ω and 1.0Ω. A 0.8Ω pod comes in the box.

How do I refill the pod?

The URSA V3 pods are top-fill, so you fill them from the top with e-liquid. The pod in the box holds 2ml.

How do I charge it?

Use the USB Type-C port. The device charges at 5V/1.2A and also supports a 5V/2A charger.

Can I adjust the airflow?

Yes. A slider on the side of the device adjusts the draw resistance.