Smok M-Coil M Series Replacement Coils - 0.8 Ohm Mesh, 5 Pack

These Smok M-Coil replacement coils come as a pack of five, so you have spares ready when your current coil is past its best. They are a 0.8 ohm mesh coil from the Smok M Series, suited to anyone who already uses a tank that takes this coil type.

Key features

• Smok M-Coil / M Series tank coil
• Pack of 5 coils
• 0.8 ohm resistance
• Mesh coil
• Recommended power range of 11-14W, with 14W listed as the best setting

The 11-14W range is the one to stay within. If you want the best result from the coil, 14W is the setting recommended for it. Having five in a pack means you can swap a coil as soon as the flavour starts to fade, rather than waiting until you have run out.

Choosing your coil

This listing is for a single coil type: the 0.8 ohm mesh coil, supplied in a pack of 5. There are no other options to choose from here.

How to use

1. Check that your tank takes the Smok M Series coil before fitting it.
2. Remove the old coil and screw the new one in firmly.
3. Fill the tank with e-liquid and leave the new coil to soak for a few minutes before first use. This helps prevent a dry, burnt taste.
4. Set your device within the 11-14W range.
5. Replace the coil when the flavour becomes dull or burnt.

FAQs

How many coils come in the pack?

There are five Smok M-Coil / M Series coils in each pack.

What power should I use?

The recommended range is 11-14W, and 14W is listed as the best setting for this coil.

What resistance is this coil?

It is a 0.8 ohm mesh coil.

Should I prime the coil before using it?

Yes. As with any new coil, let it soak in e-liquid for a few minutes before you vape, so the wick is fully saturated.