Smok RPM Lite Pod Vape Kit - 1250mAh 2ml

The Smok RPM Lite pod kit is the Lite version of the RPM40: a refillable pod vape with a built-in 1250mAh battery and an adjustable 1-40W output. It suits anyone who already vapes and wants a compact kit that ships with two different coils, so you can try both before buying spares.

Key features

• Built-in 1250mAh battery
• Adjustable output from 1W to 40W, set with the UP and DOWN buttons
• IQ-R chip
• 0.96-inch TFT screen showing wattage, resistance, voltage, screen colour, puff count and battery level
• 2ml refillable pod
• Two coils included: RPM Mesh 0.4 Ohm and RPM DC 0.8 Ohm MTL
• Measures 32 x 21 x 75mm and weighs 50g

The RPM Lite keeps the same 1-40W wattage range as the original RPM40 in a smaller body. The colour screen keeps the main readings in view, and the device works in wattage mode with a resistance range of 0.3 to 2.0 Ohm. The RPM DC 0.8 Ohm MTL coil uses dual coils with a larger heating area and a 2.0mm wicking hole.

What's in the box

• 1 x RPM Lite device (1250mAh)
• 1 x empty RPM Lite pod (2ml)
• 1 x RPM Mesh 0.4 Ohm coil
• 1 x RPM DC 0.8 Ohm MTL coil
• 1 x USB cable
• 1 x user manual

Compatibility

This kit uses RPM coils and RPM Lite pods. Replacement coils and pods from those ranges fit the device.

Choosing your colour

The RPM Lite comes in five colours: Blue, Gold, Gun Metal, Red and Silver. The specification is the same whichever you pick.

How to use

1. Fit your chosen coil into the pod and let it soak in e-liquid for a few minutes before first use.
2. Fill the pod with e-liquid, taking care not to overfill, and seat it in the device.
3. Set your wattage with the UP and DOWN buttons, increasing gradually until it suits you.
4. Charge with the supplied USB cable when the battery level on the screen runs low.

FAQs

How big is the pod?

The pod holds 2ml of e-liquid, in line with UK limits.

Which coils come in the box?

You get two: the RPM Mesh 0.4 Ohm coil and the RPM DC 0.8 Ohm MTL coil.

Is the battery removable?

No. The 1250mAh battery is built in and is charged through the USB cable.

Can I change the wattage?

Yes. Output is adjustable from 1W to 40W using the UP and DOWN buttons.