Smok TFV12 Prince RBA Deck Kit with Extension Glass

The Smok TFV12 Prince RBA Deck Kit turns a compatible SMOK TFV12 Prince Tank into a rebuildable setup. It suits experienced coil builders who want to fit and wick their own coils rather than buy replacement coil heads.

Key features

• Rebuildable RBA deck designed for the SMOK TFV12 Prince Tank
• Two-post, dual-terminal deck built for dual-coil configurations
• Approx. 0.25Ω dual coils pre-installed
• Large wicking ports
• Airflow openings beneath the coils
• Deck diameter of approx. 17mm
• Extension glass included

The build area is relatively spacious, and the large terminal openings make it easier to fit and position coils. You can run the pre-installed 0.25Ω dual coils, or swap them for your own suitable build. The generous wicking ports leave plenty of room for wicking material, and the airflow channels sit below the build deck so air is directed towards the coils.

Because you replace the coil wire and wick yourself, the deck can be rebuilt and reused instead of being swapped out as a whole coil head.

What's in the box

• 1 x SMOK TFV12 Prince RBA Core
• 1 x extension glass
• 1 x Allen key / screwdriver
• 4 x replacement screws
• 2 x sealing rings

Compatibility

This RBA is designed for the SMOK TFV12 Prince Tank. The RBA section is larger than a standard TFV12 Prince replacement coil, so the original 2ml glass on the UK/EU tank does not leave enough space for it. The included extension glass solves that.

How to use

• Fit the deck to the TFV12 Prince Tank with the extension glass in place of the original glass.
• If you are building your own coils, check the resistance on a suitable resistance meter or regulated device before use.
• Wick the coils so they are in good contact with the wick, and let the wick soak in e-liquid before you vape.
• Replace the coils and wick when performance drops off.

FAQs

Is this suitable for beginners?

It is intended for experienced users who are already comfortable with coil building, checking resistance and using rebuildable atomisers.

Which tank does it fit?

It is designed for the SMOK TFV12 Prince Tank. No other tanks are listed for it.

Do I need the extension glass?

Yes. The RBA is taller than a standard replacement coil, so the original glass on the UK/EU tank does not provide enough space. The extension glass is included in the kit.

Does it come with coils?

It comes with approx. 0.25Ω dual coils pre-installed. You can use them or replace them with your own build.