Smok TFV12 Prince Tank Coils - 0.15 Ohm Triple Mesh, Pack of 3

These Smok TFV12 Prince Tank coils are triple mesh coils with a resistance of 0.15 ohm, supplied as a pack of 3. They suit anyone who already uses the TFV12 Prince Tank and needs spare coils to keep it running.

Key features

• Triple mesh coil design
• 0.15 ohm resistance
• Rated for 80-130W, with 100-120W given as the best range
• Designed for the TFV12 Prince Tank
• Pack of 3 coils

Mesh coils use a fine mesh surface, and these are designed for quick ramp-up and good flavour. For the best results, start inside the 100-120W window and adjust from there, staying within the 80-130W rating.

What's in the box

• 3 x Smok TFV12 Prince Tank triple mesh coils, 0.15 ohm

Compatibility

• Smok TFV12 Prince Tank

How to use

1. Switch the device off and remove the old coil from the tank.
2. Fit the new coil firmly into place.
3. Fill the tank with e-liquid and leave the coil to soak for a few minutes before you vape, so the wick is fully saturated.
4. Begin at the lower end of the recommended power range and increase gradually.

FAQs

How many coils come in a pack?

There are 3 coils in each pack.

What power should I use these coils at?

The coils are rated for 80-130W. The best range is 100-120W.

Which tank do these coils fit?

They are designed for the Smok TFV12 Prince Tank.

When should I change my coil?

Replace it when the flavour fades or tastes burnt, or when the vapour becomes noticeably weaker. How often depends on your e-liquid and how much you vape.