Smok Vape Pen V2 All-In-One Vape Kit - 60W 1600mAh

The Smok Vape Pen V2 is a pen-style all-in-one vape kit with a built-in 1600mAh battery and an integrated 2ml tank. It's an update on earlier Vape Pen kits, with up to 60W output, a 0.15 Ohm mesh coil and adjustable airflow, and it suits anyone who wants a single, self-contained device rather than a separate mod and tank.

Key features

• 1600mAh internal battery
• 60W maximum output
• 2ml integrated tank, 22mm diameter
• 0.15 Ohm Vape Pen mesh coil fitted, with a second in the box
• Adjustable airflow system
• Load resistance range of 0.14 Ohm to 3.0 Ohm
• 117.7mm tall, 22mm in diameter and 94.5g in weight

Because the battery and tank are built into one body, there is nothing to match up or assemble. Smok describes the Vape Pen V2 as an upgrade on earlier generations, with improved endurance and smooth vapour from the mesh coil. The device also has built-in protections: lithium battery protection, atomiser detection, an 8 second cut-off, short circuit protection and low voltage protection. If the coil resistance falls outside the supported range, the LED flashes four times.

What's in the box

• 1 x Smok Vape Pen V2 device (2ml)
• 2 x Vape Pen Mesh 0.15 Ohm coils
• 1 x USB cable
• 1 x user manual

Compatibility

This kit uses Smok Vape Pen coils. Two Vape Pen Mesh 0.15 Ohm coils are supplied, so you have a spare ready when the first needs replacing.

Choosing your colour

The Vape Pen V2 comes in seven colours: Black, Blue, Gold, Gun Metal, Rainbow, Red and Stainless Steel. The specification is the same whichever you choose.

How to use

1. Let a new coil soak in e-liquid for a few minutes before first use, so the wick is fully saturated.
2. Fill the tank with e-liquid, keeping below the maximum fill line.
3. Set the airflow to suit you, then use the button to operate the device as described in the manual.
4. Recharge with the supplied USB cable when the battery runs low.

FAQs

How big is the tank on the Smok Vape Pen V2?

The integrated tank holds 2ml, which is the UK limit for tanks used with nicotine e-liquid.

Which coils does it use?

It uses Smok Vape Pen coils. A 0.15 Ohm Vape Pen mesh coil comes with the kit, along with a spare.

How do I charge it?

Use the USB cable included in the box. The maximum charging current is 670mA.

Is the battery removable?

No. The 1600mAh battery is internal and built into the device.

Does the colour change anything about the kit?

No. The colours are Black, Blue, Gold, Gun Metal, Rainbow, Red and Stainless Steel, and all share the same specification.