Snowwolf WF-X1 Mesh Coils - 0.17 Ohm, Pack of 5

These Snowwolf WF-X1 X-Series mesh coils are replacement tank coils for the wolf series of Snowwolf tanks, including the UX tank. They come in a pack of five, so you have spares ready when a coil needs changing.

Key features

• Snowwolf WF-X1 X-Series mesh coil
• 0.17 ohm resistance
• Rated for 40-80W
• Best performance at 50-70W
• Pack of 5 coils

The 0.17 ohm mesh coil has a wide 40-80W power range, with 50-70W marked as the best window. If you are setting up a new coil, start within that range and adjust to suit your own preference.

What's in the box

• 5 x Snowwolf WF-X1 X-Series 0.17 ohm mesh coils

Compatibility

These coils are designed for the wolf series of Snowwolf tanks, including the Snowwolf UX tank. Check that your tank belongs to the wolf series before ordering.

How to use

1. Switch off your device and empty the tank if you are changing a coil.
2. Remove the old coil and fit the new one securely.
3. Fill the tank and leave the new coil to soak for a few minutes so the wick is fully saturated.
4. Set your device within the recommended power range and take a few gentle puffs before vaping as normal.

Replace the coil when the flavour starts to taste burnt or dull, or when vapour production drops noticeably.

FAQs

How many coils are in a pack?

Each pack contains five Snowwolf WF-X1 X-Series mesh coils.

What power should I use these coils at?

They are rated for 40-80W, and the best range is 50-70W.

Will they fit the Snowwolf UX tank?

Yes. They are designed for the wolf series of Snowwolf tanks, and the UX tank is named as one of them.

Do I need to prime a new coil?

It is good practice with any new coil. Add e-liquid, let it soak for a few minutes, then start vaping at a lower power and work up within the recommended range.