Suicide Mods x Bearded Viking Ripsaw RDA - 28mm Dual Coil

The Suicide Mods x Bearded Viking Ripsaw RDA is a 28mm rebuildable dripping atomiser built around a dual coil, dual chamber design. It suits vapers who already build their own coils and want a wide deck with a forced-air inlet layout and the option to squonk.

Key features

• 28mm outer diameter
• Dual chamber intake design
• 10 individual top airflow holes aimed at the coils
• 2 post, 4 hole deck with flat head screws to clamp the coil legs
• Inner juice ramp
• Quick release drip tip
• Quick release squonk pin
• Squonk compatible

The top cap has 10 air inlet holes directed straight at the coils. Together with the top cap seal, the airflow is pushed past and around the coils and out through the mouthpiece, which is how the design aims to deliver strong flavour. The 28mm diameter leaves plenty of room either side of the posts for a dual coil build, so coils have space to sit neatly. The outlet in the centre of the deck is angled to give a smoother air transition.

To use the Ripsaw with a squonk mod, unscrew the grub screw from the 510 connection and fit the squonk pin. The pin is quick release, so switching between squonking and dripping is straightforward.

What's in the box

• 1 x Ripsaw RDA
• 1 x Bag of seals (O-rings and top cap seal)
• 1 x Solid 510 screw
• 1 x Allen key

Choosing your colour

The Ripsaw is available in four finishes:

• Brushed Stainless Steel
• Electric Blue
• Matte Black
• Polished Gun Metal

The listed specification is the same whichever finish you choose, so pick the one that suits your mod.

How to use

1. Build your coils, fit them to the deck and clamp the legs down firmly with the screws.
2. Check the resistance of your build on your device before you fire it.
3. Wick the coils, trim the ends and tuck them neatly, then wet the wick with e-liquid.
4. Fit the top cap and drip tip, then add a few drops of e-liquid, or connect your squonk bottle if you are using a squonk mod.
5. Check the wick regularly and never fire the coils when the wick is dry.

FAQs

Is the Ripsaw RDA squonk compatible?

Yes. Unscrew the grub screw from the 510 and fit the quick release squonk pin. A solid 510 screw is also included in the box.

Is it a single or dual coil RDA?

It is designed for a dual coil setup. The deck is a 2 post, 4 hole design with flat head screws to hold the coil legs.

Does it come with coils?

The contents listed are the RDA, a bag of seals, a solid 510 screw and an Allen key. Coils and wicking material are not listed, so you will need to supply your own.

What size is the Ripsaw RDA?

It has a 28mm outer diameter.

Who made it?

It is a collaboration between Suicide Mods and the Bearded Viking.