Vapcell M35A 18650 Battery - 3500mAh 10A Flat-Top Cell

The Vapcell M35A 18650 battery is a rechargeable flat-top cell built around capacity. It suits compatible lower-to-moderate power devices where longer use between charges matters more than maximum discharge output.

Key features

• 3500mAh typical capacity, 3400mAh minimum
• 10A maximum continuous discharge current
• 20A maximum discharge current
• 3.6V nominal voltage
• 4.2V end-of-charge voltage
• 2.5V end-of-discharge voltage
• Flat-top 18650 format, approx. 18.3 x 65.0mm
• Approx. 49g per cell
• Supplied as a single battery

The headline figure here is the 3500mAh capacity, which is why the M35A makes sense as a long-running 18650 vape battery for devices that don't demand a lot of current. The 10A continuous rating is the limit to respect. For high-wattage sub-ohm use, choose a battery with a higher continuous discharge rating instead.

How to use

• Check your device accepts a flat-top 18650 and that its power demands sit within the 10A continuous rating.
• Charge the cell in a suitable external battery charger. One is recommended over charging inside a device.
• Inspect the wrap before each use. Do not use a cell that is damaged or has a torn wrap.
• Carry and store spare batteries in a protective case.

FAQs

Is the Vapcell M35A suitable for high-wattage vaping?

No. It is best suited to compatible lower-to-moderate power devices. For high-wattage sub-ohm vaping, pick a battery with a higher continuous discharge rating.

What is the difference between typical and minimum capacity?

Typical capacity is 3500mAh, and the minimum rated capacity is 3400mAh.

Do I need an external charger?

An external battery charger is recommended. Charge to 4.2V.

How many batteries come in the pack?

This listing is for one Vapcell M35A 18650 battery.