Vaperz Cloud ASGARD 30mm Dual Coil Semi-Postless RDA

The Vaperz Cloud ASGARD 30mm dual coil RDA is a rebuildable dripping atomiser for experienced vapers who already build their own coils. It combines a semi-postless deck, a deep juice well and a top airflow design, with a quick release squonk pin for anyone who wants to switch between dripping and squonking.

Key features

• 30mm diameter with an additional 33mm beauty ring
• Top airflow with 54 airflow holes
• Semi-postless build deck
• Four 2.5mm x 3mm individual post holes
• 10mm juice well
• 24k gold plated positive pin and post
• Quick release squonk pin, with spare screws set in the deck
• ULTEM heat sink, airflow diffuser and chamber reducer
• Locking top cap and rail system
• Tallboy tip and shorty tip, plus spare screws and O-rings

The airflow is the main talking point. Air enters through the 54 holes on the outside into a second-stage chamber, where pressure builds before it is diffused onto the coils. It then travels at a 30 degree angle through the ULTEM airflow diffuser, passes under the coil and moves through the reduced chamber up into the drip tip. The four post holes are designed to make coil installation straightforward, and the quick release squonk pin means changing between drip and squonk mode is quick.

Choosing your colour

The ASGARD is available in four colours:

• Iced Out
• Matte Gun Metal
• Pink - a limited edition colour
• Smoked Out

The colour is the only difference between the options listed here.

How to use

1. Build and install your coils on the deck, making sure they sit securely in the post holes and do not touch the cap or each other.
2. Fit the wick, trim it and tuck it into the juice well, then wet it with e-liquid so it is fully saturated.
3. Fit the top cap and your choice of drip tip.
4. Check your coil resistance with a suitable regulated device or mechanical mod before firing, and stay within the limits of your device and battery.
5. Re-wet the wick regularly, or use the squonk pin if you are using a squonk setup.

FAQs

What size is the ASGARD RDA?

The atomiser is 30mm in diameter and comes with an additional 33mm beauty ring.

Can I use it for squonking?

The deck has a quick release squonk pin, which lets you switch between drip and squonk mode. You will need a suitable squonk device and bottle, which are not included.

Which drip tips are included?

A tallboy tip and a shorty tip are supplied.

Does it come with coils?

Coils are not listed with this RDA. It is a rebuildable atomiser, so you build your own coils to suit it.