Vaporesso GT Core GT2 Replacement Coils - 0.4 Ohm, Pack of 3

These Vaporesso GT Core GT2 coils are made to fit the NRG tank series. If your tank needs a fresh coil, this pack of three gives you spares ready to swap in.

Key features

• Vaporesso GT Core GT2 coil
• 0.4 ohm resistance
• Power range of 40-80W
• Best performance at 55-65W
• Pack of 3 coils

The coils are rated for 40-80W, with 55-65W the range Vaporesso's specification points to as giving the best results. If you are unsure where to start, set your device within that recommended window and adjust from there.

Compatibility

• NRG tank series

How to use

1. Make sure your tank is empty and switched off or removed from the device before changing the coil.
2. Unscrew or open the tank as described in its instructions and remove the old coil.
3. Fit the new GT Core coil firmly into place.
4. Add a few drops of e-liquid to the coil's wicking openings and let it soak for a few minutes before first use. This helps avoid a dry, burnt taste.
5. Refill the tank, reassemble and set your device within the recommended wattage range.

FAQs

Which tanks do these coils fit?

They are designed to fit the NRG tank series.

What wattage should I use?

The coils are rated for 40-80W, and 55-65W is the recommended range for best results.

How many coils come in a pack?

Each pack contains 3 GT Core GT2 coils.

Should I prime a new coil?

Yes. As with any new coil, let it soak in e-liquid for a few minutes before vaping so the wick is fully saturated.