Vaporesso iTank T 2ml Sub-Ohm Vape Tank - GTi Coils

The Vaporesso iTank T is a 2ml sub-ohm vape tank for people who want a direct-to-lung (DTL) setup with easy top refilling. This is the UK TPD version with straight glass, and it takes the GTi range of mesh coils.

Key features

• 2ml capacity, UK TPD version with straight glass
• Top airflow system with precision-scaled adjustment
• Slide-open top refill
• Self-circulating e-liquid system designed to reduce leaks at the base
• COREX 2.0 GTi mesh coils
• Compatible with the GTi coil range

The airflow sits at the top of the tank, with an airway running top to bottom. Vaporesso says this helps leak resistance, and the scale on the airflow control lets you return accurately to a setting you like. Condensation is drawn back up and re-vaporised, which is how the tank aims to keep the base drier. The COREX 2.0 coils use an updated mesh grid and heat-resistant cotton, which Vaporesso designed to heat quickly and help prevent a burnt taste.

What's in the box

• 1 x Vaporesso iTank T (2ml)
• 1 x GTi 0.2Ω Mesh Coil (pre-installed)
• 1 x GTi 0.4Ω Mesh Coil (spare)
• 1 x extra glass tube
• 2 x O-ring
• 1 x silicone plug
• 1 x user manual and warranty card

Compatibility

The iTank T works with the GTi coil range. The two coils in the box are the GTi 0.2Ω mesh (listed for 60-75W, best at 65W) and the GTi 0.4Ω mesh (listed for 50-60W, best at 55W). Vaporesso also lists the GTi 0.15Ω mesh (75-90W, best at 85W) and the GTi 0.5Ω mesh (30-40W, best at 35W) as compatible options.

Choosing your colour

The iTank T comes in six colours: Black, Blue, Brown, Grey, Rainbow and Silver. The colour changes the look only, and the specification is the same across all of them. Product images are for illustration.

How to use

1. Fit a coil and let it soak in e-liquid for a few minutes before first use.
2. Slide the top open and fill with e-liquid, taking care not to overfill.
3. Close the top and set the airflow to your preference.
4. Set your device within the wattage range shown for the coil you have fitted.

FAQs

How much e-liquid does it hold?

This UK version holds 2ml.

Which coils come with it?

A GTi 0.2Ω mesh coil is installed, and a GTi 0.4Ω mesh coil is included as a spare.

How do I refill it?

Slide the top open, fill through the opening and slide it closed again. There is no need to unscrew the tank.

Can I use other GTi coils?

Yes. The iTank T is compatible with the GTi coil range, including the GTi 0.15Ω and 0.5Ω mesh coils.