Vaporesso Target 200 Sub-Ohm Kit - 220W Dual 18650

The Vaporesso Target 200 sub-ohm kit pairs a compact dual 18650 mod with the upgraded 2ml iTank 2. It suits experienced vapers who want adjustable power up to 220W and a tank built around Vaporesso's GTi mesh coils.

Key features

• Dual 18650 battery mod with 5-220W output (batteries not included)
• 2ml iTank 2 with top filling, a press-to-open button and an auto open feature
• GTi coil platform with a Turbo Airflow System
• AXON CHIP with F(t) mode
• 0.96-inch TFT screen
• Type-C charging, DC 5V/2A
• Cage-like frame with a water-resistant braid
• Dimensions: 142.1 x 42.8 x 33.7mm

The Turbo Airflow System combines air from three inlets at the bottom of the tank, which Vaporesso says gives smoother airflow with less whistling noise. Airflow is adjusted by rotating the air-inlet ring on the base. The AXON CHIP's F(t) mode controls the heating rate, and the tank's self-circulating system draws condensation back in to be vaporised again, which is designed to reduce leakage at the bottom. Vaporesso positions the iTank as a direct-to-lung (DTL) tank.

What's in the box

• 1 x Vaporesso Target 200 mod
• 1 x iTank 2 (2ml)
• 1 x GTi 0.2 ohm mesh coil (60-75W), pre-installed
• 1 x GTi 0.4 ohm mesh coil (50-60W)
• 1 x extra glass tube
• O-rings
• 1 x refilling silicone plug
• 1 x Type-C USB cable
• 1 x user manual and warranty card

You will need to supply two 18650 batteries separately.

Compatibility

The iTank 2 uses GTi mesh coils. The two supplied are the GTi 0.2 ohm mesh, suggested at 60-75W, and the GTi 0.4 ohm mesh, suggested at 50-60W.

Choosing your colour

• Fiery Orange
• Jade Green
• Lava Grey
• Navy Blue
• Shadow / Carbon Black

All five colours are the same kit; only the finish differs.

How to use

Fit two matching, charged 18650 batteries, observing the polarity markings. Let a new coil soak in e-liquid for a few minutes before first use, fill the tank, set your airflow and start at the lower end of the coil's suggested wattage range.

FAQs

Are the batteries included?

No. The kit needs two 18650 batteries, which are sold separately.

How big is the tank?

The iTank 2 on this UK kit holds 2ml.

How do I fill the tank?

It fills from the top. The iTank 2 has a press-to-open button and an auto open feature, and a refilling silicone plug is supplied.

Which coils does it use?

GTi mesh coils. A 0.2 ohm and a 0.4 ohm coil are both in the box, with the 0.2 ohm pre-installed.

How do I charge it?

Through the Type-C port, with a DC 5V/2A input. A Type-C cable is supplied.