Voopoo DORIC E Pod Vape Kit - 1500mAh

The Voopoo DORIC E pod vape kit is a compact, leather-finished pod device with a built-in 1500mAh battery and a 2ml ITO pod. It suits adult vapers who want a small, simple kit with adjustable power and airflow, and it comes in six colours.

Key features

• Built-in 1500mAh battery, charged through a USB-C port at the base
• Output power of 8-25W, output voltage of 3.2-4.2V and a resistance range of 0.5-1.2 Ohm
• Three adjustable power levels
• Symmetrical dual-hole stepless airflow slider
• Draw-activated or button-activated
• Three-colour LED bar for battery status
• GENE.AI chip with seven protection functions
• Leather and zinc alloy body, 28.14 x 24.4 x 105.72mm

You change power level with three clicks of the fire button, and the LED bar shows which level you have selected. The same bar shows battery status: green for 60-100%, blue for 30-60% and red for 0-30%. The device switches on and off with five clicks. Protection covers overtime, short-circuit, overcharge, max power, output over-current, low battery and overtemperature. The airflow slider moves smoothly between settings rather than in fixed steps, so you can set the draw to suit you.

The pod holds 2ml and is made from PCTG, with a resistance of 0.7 Ohm. The body combines a leather finish with a zinc alloy frame and shiny panels.

What's in the box

• 1 x DORIC E device
• 1 x Voopoo ITO Pod 2ml
• 1 x USB Type-C cable
• 1 x user manual

Compatibility

The DORIC E uses Voopoo ITO pods. Check the pod type shown on your replacement before ordering so it matches this device.

Choosing your colour

The DORIC E is available in six colours:

• Black
• Blue / Purple
• Classic Brown
• Cyan
• Orange
• Pink

All six are the same kit with the same specification, so the choice comes down to the look you prefer.

How to use

Fit the pod to the device and fill it with e-liquid as described in the user manual. Leave a new pod to soak for a few minutes before first use so the wick is fully saturated, then switch the device on with five clicks. Set your power level with three clicks, adjust the airflow slider and draw gently, or press the fire button. Charge through the USB-C port when the LED bar turns red.

FAQs

How do I turn the DORIC E on and off?

Click the fire button five times. The same five clicks switch it off.

How do I check the battery level?

The LED bar shows green at 60-100%, blue at 30-60% and red at 0-30%.

How do I charge it?

Use the USB Type-C cable in the box and the USB-C port at the base of the device.

Do I need to press a button to vape?

No. The device can be activated by drawing on it, or you can press the fire button if you prefer.

How big is the pod?

The ITO pod holds 2ml.