Voopoo DRAG E60 Pod Mod Kit - 60W, 2550mAh

The Voopoo DRAG E60 pod mod kit is a compact, refillable pod vape built around a 2550mAh internal battery and an output of up to 60W. It suits existing vapers who want adjustable power and airflow in a slim unibody device that is easy to carry.

Key features

• 5-60W output range with 3.2-4.2V output voltage
• Built-in 2550mAh battery, charged by USB Type-C
• GENE.TT 2.0 chip with Smart, RBA and ECO modes
• 2ml PnP Pod II made from PCTG, top-filled
• Airflow adjusted by rotating the pod
• Resistance range of 0.1-3.0 ohm
• Body made from zinc alloy, leather, aluminium alloy and PC

The DRAG E60 measures 94 x 24.9 x 46 mm. The air adjustment and filling hole are hidden in the design, so the front stays clean. To fill, unscrew the mouthpiece and add e-liquid; the pod stays in place. Airflow runs from MTL to RDL as you rotate the pod.

The three modes cover different habits. Smart mode matches the wattage to the coil, RBA lets you set 5-60W manually, and ECO conserves battery. The device prompts you to enter ECO mode when the battery drops to 40%, and Voopoo states it increases the number of puffs by around 10%. You can switch it on manually at any time. Protections include low battery, over-heating, overcharge, over-current, short-circuit and overtime protection.

This kit is fired by the button. It has no auto-draw function.

What's in the box

• 1 x DRAG E60 device
• 1 x PnP Pod II (2ml)
• 1 x PnP-TW20 0.2 ohm coil
• 1 x PnP-TW30 0.3 ohm coil
• 1 x PnP Platform Card
• 1 x spare MTL drip tip
• 1 x USB Type-C cable
• 1 x user manual

Compatibility

The kit uses the Voopoo PnP Pod II and PnP coils. Voopoo rates the PnP-TW20 0.2 ohm coil for 40-55W and the PnP-TW30 0.3 ohm coil for 28-36W.

Choosing your colour

The DRAG E60 comes in 11 colours: Black, Carbon Fiber, Coffee, Golden, Grey Metal, Grey, Modern Red, Obsidian Black, Pink, Rainbow Silver and Streamers Green. The specification is the same whichever you choose.

How to use

Fit a coil into the pod and let it soak in e-liquid for a few minutes before first use. Fill the pod, keeping below the maximum line, then press the button to fire. Charge with the Type-C cable when the battery runs low. Set the wattage within the range of the coil you have fitted.

FAQs

What size is the pod?

The UK PnP Pod II holds 2ml.

Does it have auto-draw?

No. The DRAG E60 is button-activated only.

Is the battery removable?

No. It is a built-in 2550mAh battery, charged through the Type-C port at 5V/2A.

Which coils does it use?

PnP-TW20 0.2 ohm and PnP-TW30 0.3 ohm coils, both included in the box.

What does ECO mode do?

It conserves battery, which Voopoo says increases the number of puffs by roughly 10%.