Voopoo DRAG S PnP-X Pod Mod Kit - 60W 2500mAh

The Voopoo Drag S PnP-X pod mod kit is a refillable pod vape built around a 2500mAh internal battery and an adjustable 5-60W output. It suits existing vapers who want a compact, alloy-and-leather device with a colour screen and a choice of coils.

Key features of the Voopoo Drag S PnP-X pod kit

• 2500mAh internal battery, charged via Type-C (5V/2A)
• Adjustable output of 5-60W, output voltage 3.2-4.2V
• Resistance range of 0.1-3.0 Ohm
• GENE.TT chip with SMART mode, wattage memory, puff recording and score ranking
• 0.96" TFT colour display
• Auto-draw or button firing
• Infinite Airflow System
• Alloy body with a leather-material grip, 119.5 x 28 x 33mm

In SMART mode the device recognises the coil you have fitted and matches the wattage to it. If you adjust the wattage yourself, it remembers your last setting even after the atomiser is removed and refitted. The chip fires within 0.001s, and you can choose between drawing on the mouthpiece or pressing the button.

The upgraded PnP-X pod is made from PCTG with a metal decorative ring. It holds 2ml and fills through a side-filling knob on top. It has a compact anti-leak design and a 510 drip tip that can be swapped at any time. Protections include short-circuit, overcharge, over-discharge, over-temperature, over-current, max power, overtime and battery reverse protection.

What's in the box

• 1 x Drag S device
• 1 x PnP-X pod (2ml)
• 1 x PnP-VM1 coil
• 1 x PnP-VM5 coil
• 1 x USB Type-C cable
• 1 x User manual

Compatibility

The PnP-X pod is compatible with all PnP coils, including RBA coils. Two are supplied in the kit:

• PnP-VM1: 0.3 Ohm single mesh coil, 32-40W, suggested nicotine up to 10mg.
• PnP-VM5: 0.2 Ohm mesh coil, 40-60W, suggested nicotine up to 10mg.

Choosing your colour

The Drag S PnP-X is available in three colours: Eagle Black, Knight Chestnut and Knight Grey. They are the same kit, so the choice comes down to which finish you prefer.

How to use

1. Fit a coil into the pod and let it soak in e-liquid for a few minutes before first use.
2. Fill the pod through the side-filling knob on top, without going over the fill line.
3. Attach the pod to the device and set your wattage, or use SMART mode.
4. Draw on the mouthpiece or press the button, depending on how you prefer to fire it.
5. Charge with the Type-C cable when the battery runs low.

FAQs

How big is the pod?

The PnP-X pod in this kit holds 2ml.

Does it have a removable battery?

No. The Drag S PnP-X has a 2500mAh internal battery that charges through its Type-C port.

Which coils are included?

You get a PnP-VM1 (0.3 Ohm) and a PnP-VM5 (0.2 Ohm) coil in the box.

Can I use other PnP coils?

Yes. The PnP-X pod is compatible with all PnP coils, including RBA coils.