Voopoo DRAG S2 Pod Mod Kit - 60W 2500mAh 2ml Pod

The Voopoo DRAG S2 pod mod kit is a compact, adjustable device built around the PnP X pod and coil platform. It suits vapers who want a pod kit with a proper power range, a built-in 2500mAh battery and a choice of 16 colours.

Key features

• Output power adjustable from 5W to 60W
• 2500mAh built-in battery
• Output voltage 3.2-4.2V, resistance range 0.1-3.0 ohm
• Gene.TT 2.0 chip with Smart, RBA and ECO modes
• 0.96" TFT screen with a one-hand menu
• 2ml side-fill PnP X DTL pod
• Top-airflow pod design
• Zinc alloy body with vegan leather panels
• Size: 28.6 x 32.8 x 122mm

The Gene.TT 2.0 chip gives you three modes. Smart matches the output power automatically and is aimed at newer users. RBA lets you set your own power anywhere from 5W to 60W. ECO is designed to extend coil and battery life by approximately 10%. Voopoo also builds in overtime, short-circuit, overcharge, output over-current, low battery and chip over-temperature protections.

The body combines zinc alloy with vegan leather, and each colour has its own debossed pattern. Voopoo rates each PnP X coil at approximately 100ml of e-liquid, though how long a coil lasts in practice will depend on how you vape and the e-liquid you use.

What's in the box

• 1 x Voopoo DRAG S2 device
• 1 x PnP X DTL cartridge (2ml)
• 1 x PnP X 0.3 ohm coil (pre-installed)
• 1 x PnP X 0.2 ohm coil
• 1 x USB Type-C charging cable
• 1 x user manual
• 1 x PnP X platform card

Compatibility

The kit uses PnP X pods and PnP X coils. The included DTL cartridge takes PnP X 0.2 ohm and 0.3 ohm coils, and Voopoo recommends e-liquid of 50-70% VG with it. Voopoo also makes an MTL version of the cartridge, which pairs with PnP X 0.3 ohm or 0.6 ohm coils and is recommended for 50% VG e-liquid. The MTL cartridge is not included in this kit. Drip tips use a standard 510 connection and can be swapped between the two pod versions.

Choosing your colour

The DRAG S2 is available in 16 colours:

• Carbon Fiber
• Checkered Black
• Champagne Golden
• Classic
• Colourful Silver
• Galaxy Blue
• Glow Pink
• Grey Metal
• Marsala
• Moss Green
• Modern Red
• Pearl White
• Retro
• Sky Blue
• Snow Blue
• Spray Black

Every option has the same specification, so the choice comes down to the look and finish you prefer.

How to use

1. Fit the coil firmly into the pod if it is not already installed, and let a new coil soak in e-liquid for a few minutes before first use.
2. Fill the pod through the side fill port, keeping below the maximum 2ml.
3. Seat the pod in the device and select Smart, RBA or ECO mode.
4. Charge using the USB Type-C cable when the battery runs low.

FAQs

Is the DRAG S2 a mouth-to-lung or direct-to-lung kit?

The pod supplied in the box is the DTL (direct-to-lung) version. Voopoo also makes an MTL cartridge for the same platform, but it is not included.

Which coil is fitted when it arrives?

A PnP X 0.3 ohm coil is pre-installed in the pod, and a PnP X 0.2 ohm coil is included in the box.

How much e-liquid does the pod hold?

The UK version of the pod holds 2ml and fills from the side.

What e-liquid should I use?

Voopoo recommends 50-70% VG e-liquid with the DTL pod.

Can I change the power?

Yes. Output is adjustable from 5W to 60W, and Smart mode will set the power for you if you prefer.