Voopoo DRAG X2 Pod Mod Kit - 80W with 2ml PnP X Pod

The Voopoo DRAG X2 pod mod kit is a compact, adjustable device built around the PnP X pod and coil platform. It suits vapers who want a refillable pod vape with wattage control and a choice of modes, in a body that combines zinc alloy with vegan leather.

Key features

• 5-80W adjustable output, 3.2-4.2V output voltage
• Runs on a single 18650 battery (not included)
• Gene.TT 2.0 chip with Smart, RBA and ECO modes
• 2ml PnP X DTL pod cartridge with side filling
• Resistance range of 0.1-3.0 ohm
• 0.96" TFT screen with a one-hand menu
• Zinc alloy and vegan leather construction, 28.6 x 31.8 x 129.8mm
• Overtime, short-circuit, overcharge, output over-current, low battery and chip over-temperature protections

The Gene.TT 2.0 chip gives you three modes. Smart automatically matches the output power and is aimed at newer users. RBA lets you set your own power within a 5-60W range. ECO is designed to extend coil and battery life by approximately 10%. Voopoo also states that a single PnP X coil can last for approximately 100ml of e-liquid without flavour fading or coil burnout. That is a manufacturer claim, and real-world life will depend on how you use it.

The pod uses a top-airflow design which Voopoo says helps control leaking and condensate. The drip tip is a standard 510 fitting, so the tips on the MTL and DTL pod versions can be swapped for one you prefer.

What's in the box

• 1 x Voopoo DRAG X2 device
• 1 x PnP X DTL 2ml pod cartridge
• 1 x PnP X 0.15 ohm coil (pre-installed)
• 1 x additional PnP X coil
• 1 x USB Type-C charging cable
• 1 x user manual
• 1 x PnP X platform card

An 18650 battery is not included, so you will need to buy one separately.

Compatibility

The DRAG X2 uses PnP X pods and PnP X coils. The PnP X platform has both MTL and DTL pod versions, and the DTL version is the one supplied in this kit.

Choosing your colour

There are 16 colours: Carbon Fiber, Checkered Black, Champagne Golden, Classic, Colourful Silver, Galaxy Blue, Glow Pink, Grey Metal, Marsala, Moss Green, Modern Red, Pearl White, Retro, Sky Blue, Snow Blue and Spray Black. The vegan leather carries its own debossed pattern with each colour. Colour makes no difference to performance.

How to use

1. Fit a charged 18650 battery, following the polarity marked in the device and the manual.
2. Lift the rubber stopper on the side of the pod and fill it with e-liquid, without going over the fill line.
3. Leave a new coil to soak for a few minutes before the first use.
4. Choose a mode and set your power, then vape.

FAQs

Is the battery included?

No. The DRAG X2 takes one 18650 battery, which you need to buy separately. A USB Type-C cable is supplied.

What size is the pod?

The included PnP X DTL pod holds 2ml and fills from the side.

What e-liquid should I use?

Voopoo recommends e-liquid with 50-70% VG.

Does the kit come with a spare coil?

Yes. One PnP X 0.15 ohm coil is pre-installed in the pod, and a second PnP X coil is supplied in the box.

Can I change the power?

Yes. Output is adjustable from 5W to 80W. In RBA mode the adjustable range is 5-60W.