Voopoo Uforce U4 0.23 Ohm Replacement Coils - Pack of 5

These Voopoo Uforce U4 coils are replacement tank coils with a 0.23 ohm resistance, supplied in a pack of five. They suit anyone already using a compatible Voopoo tank who wants spares ready for when the current coil needs changing.

Key features

• Voopoo Uforce U4 coil with a quadruple coil design
• 0.23 ohm resistance
• Power range of 50-120W
• Best results at 60-80W
• Pack of 5 coils

The stated power range is 50-120W, and the recommended sweet spot is 60-80W. If you are setting up a new coil, start within that recommended band and adjust from there, staying inside the full range.

Compatibility

These Uforce coils are designed to fit various Voopoo tanks. Check the coil type listed for your tank before ordering, so you know the U4 coil is the right one for your setup.

How to use

1. Remove the tank from your device and take the tank apart following its instructions.
2. Unscrew the old coil and fit the new Uforce coil firmly.
3. Prime the coil by putting a few drops of e-liquid directly onto the wick openings, then fill the tank.
4. Leave the tank to stand for several minutes so the wick can soak fully.
5. Set your device to a suitable power within the coil's range and take a couple of gentle puffs before vaping normally.

FAQs

What power should I use with the Uforce U4 coil?

The coil is rated for 50-120W, and 60-80W is the recommended range for best results.

How many coils come in a pack?

There are 5 Voopoo Uforce U4 coils in each pack.

Which tanks do these coils fit?

They are designed to fit various Voopoo tanks. Check your tank's specification to confirm it takes the Uforce U4 coil.

Why should I let a new coil soak?

Letting the wick absorb e-liquid before use helps avoid a dry, burnt taste from a coil that has not been fully saturated.