Voopoo VINCI X Pod Vape Kit - 5 Coil Special Edition

The Voopoo VINCI X pod kit is a refillable pod vape that runs from a single 18650 battery and gives you adjustable power from 5W to 70W. This Special Edition comes with five different PnP coils, so you can try them and settle on the one you like best.

Key features of the Voopoo VINCI X pod kit

• 5-70W output with a 3.2-4.2V output voltage range
• Single 18650 battery behind a twist-off cap (battery not included)
• GENE.AI chip with intelligent coil matching and a 2-week usage record
• 0.96" TFT colour screen
• 2ml pod with a visible e-liquid level and a metal holder
• Works with e-liquid and nic salt
• Zinc alloy body, 117 x 29.5 x 25.3mm including the pod
• Eight protections, including short circuit, overcharge, over-discharge and over-temperature

The GENE.AI chip matches the power to the coil you fit, which is handy if you are not used to setting wattage yourself. The screen also shows a puff curve, with cumulative puffs displayed in real time and recorded for up to two weeks. The pod rotates by 180 degrees to change the airflow, from fully open to a more restrictive MTL feel.

What's in the box

• 1 x VINCI X device
• 1 x VINCI replacement pod (2ml)
• 1 x PnP VM1 coil (0.3 ohm)
• 1 x PnP VM4 coil (0.6 ohm)
• 1 x PnP coil (0.45 ohm)
• 1 x PnP coil (0.8 ohm)
• 1 x PnP coil (1.0 ohm)
• 1 x USB cable
• 1 x user manual, 1 x warranty card and 1 x chip card

You will need to supply your own 18650 battery.

Compatibility

The kit uses Voopoo PnP coils. The manufacturer recommends the PnP-VM1 0.3 ohm coil (rated 32-40W) for regular e-liquid and the PnP-VM4 0.6 ohm coil (rated 20-28W) for nic salt. It also lists the PnP-VM3 (0.45 ohm, 25-35W), PnP-R1 (0.8 ohm, 12-18W) and PnP-R2 (1 ohm, 10-15W) as compatible.

Choosing your colour

There are two colours: Carbon Fiber Black and Dazzling Green. Both are the same kit with the same contents.

How to use

1. Fit a charged 18650 battery by twisting off the cap.
2. Press your chosen PnP coil into the pod and let it soak in e-liquid for a few minutes before first use.
3. Fill the pod, making sure not to overfill, and fit it to the device.
4. Turn the pod to set the airflow, then check the power on the screen.

FAQs

Is the battery included?

No. The VINCI X needs one 18650 battery, which is sold separately.

How many coils come with this kit?

Five PnP coils: 0.3 ohm (VM1), 0.6 ohm (VM4), 0.45 ohm, 0.8 ohm and 1.0 ohm. One 2ml pod is also included.

Can I use nic salt in it?

Yes. The VINCI X works with both e-liquid and nic salt.

Can I change the airflow?

Yes. Rotating the pod by 180 degrees moves the airflow from fully open to a more restrictive MTL feel.