Voopoo VMATE E Pod Vape Kit - 1200mAh 20W

The Voopoo VMATE E pod kit is a compact, draw-activated pod vape with a 1200mAh built-in battery and a zinc alloy and leather finish. It suits vapers who want a simple, button-free device that ships with two pods in the box, so you can try both resistances straight away.

Key features

• 1200mAh built-in battery
• Output up to 20W, adjusted automatically by the GENE.AI chip
• 2ml pod capacity (UK TPD version)
• Pre-installed ITO coils in the VMATE V2 cartridges
• Stepless adjustable airflow slider
• Silver ion mouthpiece
• Type-C charging at 5V/1.2A, with a stated full charge time of about 45 minutes
• Dimensions: 99.5 x 30.5 x 17mm

There are no buttons to think about: the VMATE E is draw-activated only, so you simply inhale to fire it. The output voltage range is 3.2V to 4.2V and the resistance range is 0.3 to 3.0ohm, with power managed by the GENE.AI chip. The device body is made from zinc alloy and premium leather, while the pods are PCTG. The cartridges use pre-installed coils that cannot be replaced, so you change the whole pod when the coil is spent.

What's in the box

• 1 x VMATE E device
• 1 x VMATE V2 cartridge 0.7ohm, 2ml
• 1 x VMATE V2 cartridge 1.2ohm, 2ml
• 1 x protective leather cap
• 1 x Type-C cable
• 1 x user manual

Compatibility

The kit works with VMATE V2 cartridges and V.THRU cartridges.

Choosing your colour

The VMATE E comes in ten colours: Ash Marble, Classic Brown, Classic Blue, Green Inlaid Gold, Luxury Walnut, Mint Blue, Pink Marble, Red Inlaid Gold, Sakura Pink and White Inlaid Gold. The choice is purely a matter of look; the specification is the same across the list.

How to use

Fill the pod with e-liquid following the instructions in the user manual, and leave a new coil a few minutes to soak before your first draw. Fit the pod, then inhale gently to start. Slide the airflow control to the draw you prefer. Charge with the supplied Type-C cable when the battery runs low.

FAQs

Does it have a button?

No. The VMATE E is draw-activated only, so it fires when you inhale.

How big are the pods?

The pods hold 2ml in the UK TPD version.

Can I replace the coil?

The coils in the VMATE V2 cartridges are pre-installed and non-replaceable, so you replace the whole cartridge.

How do I charge it?

Use the Type-C cable supplied. Charging is at 5V/1.2A, and the manufacturer states a full charge takes about 45 minutes.

Which pods can I use?

VMATE V2 cartridges and V.THRU cartridges.