Wotofo Faris 24mm RDTA / RDA Combo - 2ml Dual Coil

The Wotofo Faris is a 24mm RDTA and RDA combo for people who already build their own coils. It was designed by Wotofo together with reviewer Vape GeekQ8, and it gives you a 2ml rebuildable tank atomizer that converts to a dripping RDA when you want a simpler setup.

Key features

• 2-in-1 design: RDTA with a 2ml frosted PC tank tube, or RDA using the bottom section from the accessory bag
• 24mm postless build deck for single or dual coil builds
• Four terminals with side screws for mounting coils
• Squonkable
• Adjustable side airflow with pocket-hole style air inlets
• Condensate barrier inside the top cap
• Duckbill valve on the side filling port
• Wicking port block included for single coil builds

The postless deck is spacious, which makes building easier whether you run one coil or two. The pocket-hole air inlets are Wotofo's signature design: air is directed from the bottom of the coil upwards, and the layout is intended to stop e-liquid escaping through the air holes. The barrier in the top cap is there to stop condensate running up the inner wall towards the drip tip, while the duckbill valve on the filling port is designed to prevent backflow and leaks when you top up.

An RDTA needs its wicking ports adjusted when you change between single and dual coil, otherwise liquid flow from the tank is harder to control. The Faris includes a wicking port block for exactly that reason.

What's in the box

• 1 x Faris RDTA
• 1 x user manual
• 1 x wicking port block
• 1 x extra 810 drip tip
• 1 x 2ml frosted PC tank tube
• 1 bag of Framed Staple Clapton coils
• 1 bag of Japanese cotton
• 1 bag of extra O-rings and screws

The included coil is a Framed Staple Clapton in 28G+38Gx9+28G+36G N80, 3mm ID, at 0.33ohm.

Choosing your colour

• Gold
• Rainbow

Both colours are the same Faris atomizer, so pick the finish you prefer.

How to use

Build your coil or coils on the deck and trim the leads neatly. Fit the wicking port block if you are building a single coil. Wick the coil and wet the cotton with e-liquid before fitting the tank tube, then fill through the side port and leave it a few minutes to soak before your first puff. To use it as an RDA, detach the tank section and screw on the RDA bottom from the accessory bag. Make sure your battery device is suitable for the resistance of your build.

FAQs

Can the Faris be used as an RDA?

Yes. Remove the tank section and screw on the RDA bottom supplied in the accessory bag.

Can I run a single coil?

Yes. The deck supports single and dual coil builds, and a wicking port block is included for single coil use.

Is it squonkable?

Yes, the Faris is squonkable, so it can be used with a squonk mod.

Does it come with a coil?

Yes. A bag of Framed Staple Clapton coils (0.33ohm) is included, along with a bag of Japanese cotton.

How much does the tank hold?

The tank tube holds 2ml.