Wotofo Gear V2 24mm Single Coil RTA - 2ml Top Fill

The Wotofo Gear V2 RTA is a compact 24mm single coil rebuildable tank for vapers who like to build their own coils but want a simple, tidy deck to work on. It has a postless design, a fixed airflow and a 2ml top-fill tank, and it ships with ready-made coils so you can get started straight away.

Key features

• 24mm diameter, 38.5mm high including drip tip and 510 pin
• 2ml e-liquid capacity, top filling
• Single coil, postless build deck with pan head screws kept on the deck
• Fixed side airflow
• Stainless steel and PCTG construction with a German PEEK insulator
• 510 thread
• Power range 5 - 60W, best at 40 - 55W

Wotofo describes the Gear V2 as an upgrade on the original Gear RTA, with a short air passage and a compressed vaporisation chamber designed to deliver flavour quickly. The drip tip and top cap are combined into one piece. Two small airflow walls on the deck are there to keep vapour delivery smooth.

Airflow is fixed rather than adjustable. With no control ring, there are fewer gaps for condensation to seep through, which suits anyone who would rather set the tank up once and leave it alone.

What's in the box

• Gear V2 RTA x 1
• Framed Staple Clapton coil, 0.33 ohm x 2
• 3mm thick cotton strip x 2
• Screwdriver x 1
• Accessory bag x 1
• User manual x 1

The included coils are Ni80 Framed Staple Clapton, built with a 28G + 38G x 9 + 28G inner core and a 36G outer wire, with a 3mm internal diameter.

Choosing your colour

The Gear V2 is available in five colours:

• Black
• Blue
• Gold
• Gun Metal
• Rainbow

The colour is the only difference between the options.

How to use

1. Fit a coil to the deck and secure it with the screws, keeping the legs fully seated.
2. Thread a cotton strip through the coil, trim the ends and tuck them neatly in the deck.
3. Wet the wick with e-liquid, fill the tank through the top and let it soak for a few minutes before you vape.
4. Screw the RTA onto a 510 device, start at a lower wattage and increase gradually within the 5 - 60W range.

Check the coil resistance on your device before firing, and never fire a dry wick.

FAQs

Can I adjust the airflow?

No. The Gear V2 has a fixed side airflow, so there is no airflow ring to adjust.

How much e-liquid does it hold?

The tank capacity is 2ml and it fills from the top.

Will it fit my mod?

It uses a 510 thread and is 24mm in diameter. If your device is narrower than 24mm, the tank will sit slightly wider than the body, so check this against your device.

Do I need to buy coils separately?

Two Framed Staple Clapton coils (0.33 ohm) and two cotton strips are included. You will need your own e-liquid, and spare coil wire or cotton if you want to rebuild later.