Wotofo Mesh-Style Multi Hole Coil Strips 0.18 Ohm - Pack of 10

These Wotofo mesh-style multi hole coil strips are rebuildable mesh coils for people who build their own coils on a clamp-style deck. Each pack contains 10 strips at 0.18 ohm, designed for the Profile RDA and also usable on other mesh devices.

Key features

• Pack of 10 coil strips
• 0.18 ohm resistance
• Perforated Kanthal A1 sheet with small holes punched evenly across it
• Measures 16mm x 6.8mm
• Best performance at 40-60 watts
• Heats rapidly and holds a stable structure that resists deformation
• Easy to clean and maintain

Wotofo describe this strip as an improved, larger version of the heating element used in their Flow Pro coil head. Because the holes are punched into a single sheet, it gives a larger contact surface than a traditional wire coil, and larger than a mesh woven from strands of heating wire. The aim is more contact with your e-liquid, which is why mesh builds are popular with flavour-focused vapers.

Compatibility

• Profile RDA (the device these strips are designed for)
• Profile & Mesh RDA
• Profile M RTA
• Other mesh devices and various types of clamp build decks

Check that your deck can hold a 16mm x 6.8mm strip before you buy.

How to use

1. Fit a strip to your clamp build deck and secure it firmly, keeping it flat and even.
2. Check the resistance on your device or ohm reader before firing.
3. Dry burn gently at 15-20W, which is the range recommended for mesh coils of this type, then allow it to cool.
4. Wick and fully soak the coil with e-liquid before you start vaping.
5. Vape at 40-60W, the range this strip is made to perform best in.

FAQs

How many coil strips are in a pack?

There are 10 strips in each pack.

What wattage should I use?

The 0.18 ohm strip is made to perform best at 40-60 watts. For dry burning, the recommended range is 15-20 watts.

Which devices do these fit?

They are designed for the Profile RDA, and are also listed for the Profile & Mesh RDA and Profile M RTA. They can be used on other mesh devices and various clamp build decks too, provided the strip fits the deck.

What are the strips made from?

Each one is a perforated sheet of Kanthal A1.