Wotofo nexMesh Pro Sub-Ohm Tank - 2ml, 24mm

The Wotofo nexMesh Pro sub-ohm tank is a 2ml, 24mm tank built around mesh-style coils, with the option of a rebuildable deck for anyone who likes to build their own. It suits vapers who want a top-fill tank with adjustable airflow and a choice of coil designs.

Key features

• 2ml capacity in a straight PCTG tank
• 24mm diameter, 40.85mm tall excluding the drip tip and 510 pin
• Top fill
• Adjustable bottom airflow
• 510 threading
• 810 Delrin drip tip
• Wattage range of 50W - 80W
• Net weight 72g, give or take 3g
• Available in six colours

The nexMesh Pro is an upgrade on the earlier Wotofo / OFRF nexMesh tank and keeps its conical heating core design. The #H15 coil supplied in the box pairs a steel mesh side with a dual-wire parallel coil side. Wotofo describes the mesh side as giving a rich, delicate flavour and the parallel side as a more direct taste. The tank also accepts a rebuildable deck, so you can fit your own atomiser build.

What's in the box

• 1 x nexMesh Pro tank
• 2 x #H15 Mesh / Parallel Coil Combo Head (one pre-installed)
• 1 x accessory bag
• 1 x user manual

Compatibility

The nexMesh Pro uses Wotofo's own coil heads and a rebuildable deck. The resistance and wattage range for each coil are listed below.

• #H15 Single Mesh and Parallel Coil: 0.15 ohm, 65W - 80W
• #H12 Clapton Mesh Coil: 0.2 ohm, 55W - 75W
• #H13 Single Conical Net Mesh Coil: 0.15 ohm, 65W - 78W
• #H11 Single Conical nexMesh Coil: 0.2 ohm, 60W - 70W
• #H17 Rebuildable Deck: for DIY builds with your own atomiser core

Choosing your colour

There are six colours to choose from:

• Black
• Blue
• Gold
• Gun Metal
• Rainbow
• Stainless Steel

How to use

1. Fit the coil head and let it soak with e-liquid for a few minutes before first use, so the wick is fully saturated.
2. Fill through the top fill opening, keeping e-liquid out of the central airflow tube.
3. Screw the tank onto a 510 device and set the power within the range printed for your coil.
4. Adjust the bottom airflow ring to suit you, and replace the coil when the flavour fades.

FAQs

How do I fill the nexMesh Pro?

It is a top-fill tank. Open the top and fill the 2ml tank directly, with no need to remove the coil or turn it upside down.

Will it fit my device?

The tank has a 510 thread and a 24mm diameter. Check that your device has a 510 connection and that the tank sits well on it.

Which coil comes in the box?

Two #H15 Mesh / Parallel Coil Combo heads are included, and one is already installed in the tank.

Can I rebuild it?

Yes. The tank works with the #H17 rebuildable deck, which is designed for a DIY atomiser build.