Wotofo Pre-Built Alien Clapton Coils 0.22 Ohm - Pack of 10

These Wotofo pre-built Alien Clapton coils come ready wound, so you can fit a fresh coil to your rebuildable setup without winding your own. Each pack holds 10 coils at 0.22 ohm, made from N80 wire with a 3mm internal diameter.

Key features

• Pack of 10 pre-built coils
• Alien Clapton construction, wrapped 3*26+36
• Material: N80
• Inner core: 26G x3
• Outer wire: 36G
• Internal diameter: 3mm
• Resistance: 0.22 ohm

The wrap is built from three strands of 26G wire forming the inner core, with 36G wire wound around the outside. Because the coils are made up in advance, every one in the pack has the same specification, which takes the guesswork out of replacing a coil. A pack of 10 also means you have spares on hand.

How to use

1. Check that your device and build deck can take a coil with a 3mm internal diameter and a 0.22 ohm resistance.
2. Fit the coil to the posts and tighten securely, making sure it does not touch the deck or any other part.
3. Check the resistance with your device or an ohm reader before firing.
4. Fit your wicking material, trim it to suit, and soak it thoroughly with e-liquid before first use.

FAQs

What resistance are these coils?

They are 0.22 ohm.

How many coils come in a pack?

Each pack contains 10 pre-built coils.

What does 3*26+36 mean?

It describes the Alien Clapton wrap: an inner core of three 26G wires, wrapped with 36G wire.

Will they fit my atomiser?

The internal diameter is 3mm, so check that your build deck suits a coil of that size and that your device supports a 0.22 ohm resistance before buying.

Do new coils need priming?

Yes. Soak the wick fully with e-liquid and let it settle for a few minutes before you first fire the coil.