Wotofo Pre-Built Coils - 0.62 Ohm Dual Core Fused Clapton, 10 Pack

These Wotofo pre-built coils are a pack of ten dual core fused Clapton coils with a resistance of 0.62 ohm. They suit anyone who builds on a rebuildable atomiser and would rather fit a ready-made coil than wrap their own.

Key features

• Pack of 10 pre-built coils
• Dual core fused Clapton construction
• Resistance: 0.62 ohm
• Material: Ni80
• Inner core: 28G x 2
• Outer wire: 38G
• Internal diameter: 3mm

Each coil pairs two 28G inner cores with a 38G outer wire, fused together in a Clapton style. Because the coils arrive pre-built, you spend less time wrapping and more time getting your build set up. The 3mm internal diameter is worth checking against your atomiser's posts and deck before you buy. Ten coils in a pack also means you have spares ready for when one needs replacing.

How to use

1. Check the coil's resistance and size suit your device and atomiser.
2. Fit the coil to the posts, making sure it sits cleanly and does not touch any other part of the deck.
3. Thread the wick through the coil and trim it so it sits comfortably in the wicking channels.
4. Wet the wick with e-liquid and let it soak for a few minutes before firing.
5. Always use a resistance checker or mod that reads resistance, and follow your device maker's guidance on settings.

FAQs

How many coils are in a pack?

There are 10 pre-built coils in each pack.

What are the coil specifications?

They are 0.62 ohm dual core fused Clapton coils in Ni80, with a 28G x 2 inner core, 38G outer wire and a 3mm internal diameter.

Do I need to build these myself?

No. They are pre-built, so there is no need to wrap them. You will still need to fit them to a rebuildable atomiser and wick them.

Which atomisers do they fit?

The coils have a 3mm internal diameter. Check this and the post spacing against your atomiser before fitting.