Wotofo Profile PS Dual Mesh RDA - 28.5mm Build Deck

The Wotofo Profile PS Dual Mesh RDA is a 28.5mm rebuildable dripping atomiser designed with MrJustRight1 for vapers who already build their own coils. Its dual mesh deck can be run in parallel or in series, so you can choose the resistance that suits your mod and setup.

Key features

• 28.5mm dual mesh build deck
• Parallel or series coil configuration, with a converter pin supplied for series
• Drip or squonk feeding, with both parallel and series squonk pins
• Adjustable side airflow with a honeycomb airflow design
• Clamp-securing system and spring-loaded ceramic support
• Stainless steel body, German PEEK insulator, 510 threading
• 810 resin drip tip

The Profile PS ships with the parallel solid pin fitted. The included mesh is rated at about 0.3Ω, which gives roughly 0.15Ω in parallel or 0.6Ω in series. Wotofo recommends 75-85W, within a 60-90W range. The deck is larger than the original Profile and keeps its clamp system and spring-loaded ceramic support, which are there to help the mesh and cotton make good contact. Overall height is 35.5mm including the 810 drip tip and 510 pin.

For squonk mods, the squonk pins let you fit it to a bottom-fed setup, and there is a deep juice well if you prefer to drip directly.

What's in the box

• 1 x Profile PS Dual Mesh RDA (parallel solid pin pre-installed)
• 2 x 0.3Ω Wotofo mesh strips
• 2 x 6mm thick cotton strips
• 1 x coil bending tool
• 1 x Allen key
• 1 x accessory bag
• 1 x user manual

Compatibility

The deck uses replaceable mesh strips: WOTONEXM, WOTOPBC-MESH, OFRFNEXMESH and the newer WOTOPBC-0.3MESH. Mesh strips made for the original Profile, Profile 1.5 and Profile RDA fit the dual mesh deck. The matching cotton is WOTOPROCOTTON. The 510 connection fits mods with a 510 thread.

Choosing your colour

The Profile PS is available in Black, Blue, Gold, Gun Metal, Rainbow and Stainless Steel. The choice is purely about looks, so pick the finish that suits your mod.

How to use

Fit your mesh strips and secure them with the clamps, then check the resistance on your mod before firing. Wet the cotton with e-liquid and let it soak in before first use. Add a few drops to the deck or juice well to keep the wick saturated. Start at the lower end of the recommended wattage and adjust from there.

FAQs

How do I switch from parallel to series?

Remove both parts of the contact pin and fit the converter pin from the accessory bag in its place. The RDA arrives with the parallel solid pin installed.

What wattage should I use?

Wotofo recommends 75-85W, with a 60-90W range for the RDA.

Can I use it on a squonk mod?

Yes. It comes with both parallel and series squonk pins for bottom-fed mods, and it can also be dripped directly.

Are mesh strips and cotton included?

Yes. The box has two 0.3Ω mesh strips and two 6mm thick cotton strips, so you can build straight away.