Wotofo Profile Unity Mesh RTA - 25mm, 2ml UK TPD

The Wotofo Profile Unity mesh RTA is a 25mm rebuildable tank atomiser built for flavour, developed by Wotofo with MrJustRight1 and The Vapor Chronicles. This is the 2ml UK TPD version with straight glass, and it suits vapers who already know their way around building and wicking.

Key features

• 25mm diameter, 48.5mm overall height, 510 thread
• 2ml e-liquid capacity, top filling with a Tongue & Groove cap
• nexMESH OFRF triple density mesh coil
• Adjustable side airflow, from tight to loose
• Resin 810 drip tip
• Bi-level juice port structure for steady e-liquid feeding
• German PEEK insulator
• Build deck optimised from the Profile RDA

The Profile Unity RTA keeps the build deck of the Profile RDA and adds an e-liquid reservoir to it. Wotofo describes the deck and chamber as linked, with a coil-focused air supply, and the bi-level juice port is there to keep e-liquid reaching the wick. The cap uses a Tongue & Groove design, which makes refilling and sealing quick. Wotofo made the 2ml build specifically for the British market to meet TPD rules.

The supplied nexMESH OFRF coil is Kanthal A1, 16*6.8mm and 0.13ohm, with a recommended wattage of 60-70W.

What's in the box

• 1 x Profile Unity RTA
• 1 x tube adapter chimney
• 1 x user manual
• 1 x bending tool
• 1 x screwdriver
• 1 bag of nexMESH coils (0.13ohm), 2 coils
• 1 bag of 6mm agleted cotton
• 1 bag of spare O-rings, screws and springs

Compatibility

The tank has a 510 thread. The nexMESH coil (16*6.8mm) and the 6mm agleted organic cotton are both listed as compatible with the Profile RDA.

Choosing your colour

The Profile Unity is available in four colours: Blue, Gold, Rainbow and Stainless Steel. Photos are for colour illustration only. Whichever you choose, you get the same 2ml UK TPD tank with straight glass.

How to use

1. Fit the coil and wick it following the user manual, trimming the wick so it sits neatly without being packed in tightly.
2. Add a few drops of e-liquid directly to the wick, then fill the tank through the top.
3. Leave it to soak for a few minutes before the first draw. This helps avoid a dry, burnt taste.
4. Start at the lower end of the recommended wattage range and adjust the airflow to taste.

FAQs

How much e-liquid does it hold?

This UK version holds 2ml and fills from the top.

Does it come with coils?

Yes. The box includes two nexMESH OFRF coils (0.13ohm) and a bag of 6mm agleted cotton, plus a bending tool, screwdriver and spare O-rings, screws and springs.

What size is it?

It is 25mm in diameter and 48.5mm tall overall, on a 510 thread.

Can I adjust the airflow?

Yes. The side airflow is adjustable, and Wotofo describes the range as tight to loose.