Wotofo Profile X RTA Rebuildable Tank - 28mm, 2ml

The Wotofo Profile X RTA is a 28mm rebuildable tank for vapers who like the choice of building their own coils or using mesh strips. It holds 2ml in its TPD edition and uses an adjustable top-airflow design, with three nexMESH mesh strips included so you can start straight away.

Key features

• 28mm build deck, 43.7mm tall including pin and drip tip
• 2ml e-liquid capacity (TPD edition) with a PCTG tube
• Supports single mesh, single wire and dual wire coils
• Adjustable top airflow with a honeycomb airflow design
• Quarter-turn top fill with dual fill ports
• 810 coloured resin drip tip
• German PEEK insulator and a ceramic cotton spring deck
• 510 thread

The top-airflow layout is designed to prevent leaking, and the honeycomb airflow lets you adjust the balance of vapour and flavour to suit you. Refilling is done through the top, using a quarter-turn cap with two fill ports. The Profile X RTA fits the Profile Mesh Coils and also takes single and dual wire builds, so you are not tied to one coil style.

What's in the box

• 1 x Profile X RTA
• 1 x nexMESH Chill A1 0.15 Ohm mesh strip
• 1 x nexMESH Turbo A1 0.13 Ohm mesh strip
• 1 x nexMESH Extreme A1 0.16 Ohm mesh strip
• 2 x Framed Staple Clapton Ni80 0.33 Ohm
• 3 x 6mm thick cotton strip
• 2 x 3mm thick cotton strip
• 1 x mesh bending tool
• 1 x cross head screwdriver
• 1 x accessory bag
• 1 x user manual

Compatibility

The Profile X RTA supports single mesh coils, single wire coils and dual wire coils, and fits the Profile Mesh Coils. It uses a standard 510 thread connection.

nexMESH options

• nexMESH Chill: smooth, creamy vapour that brings out even small flavour notes in your e-liquid.
• nexMESH Turbo: a balance between flavour and vapour production.
• nexMESH Extreme: thick vapour with a rich, strong flavour.

Choosing your colour

The Profile X RTA is available in Black, Blue, Gold, Gun Metal, Rainbow and Stainless Steel. The specification is the same whichever colour you choose.

How to use

1. Install your chosen mesh strip or build your wire coil, then fit the wick as set out in the user manual.
2. Wet the wick with e-liquid and let it soak before filling the tank.
3. Fill through the top fill ports, then close the cap with a quarter turn.
4. Screw the tank onto a 510 device, wait a few minutes, then adjust the airflow to taste.

FAQs

How much e-liquid does the Profile X RTA hold?

This TPD edition holds 2ml.

Can I use it with wire coils as well as mesh?

Yes. It supports single mesh, single wire and dual wire coils.

How do I fill it?

Through the top. The quarter-turn top fill has two fill ports.

Does it come with coils?

Yes. The box includes three nexMESH mesh strips, two Framed Staple Clapton Ni80 0.33 Ohm coils, cotton strips and the tools to fit them.