Wotofo Recurve 80W BF Squonk Mod - 2ml Bottle

The Wotofo Recurve 80W BF squonk mod is a semi-regulated mechanical squonk mod, made in collaboration with Mike Vapes and designed to feed a bottom-feeding RDA. It suits experienced vapers and builders who already understand Ohm's Law and want a single-battery squonk set-up with built-in protections.

Key features

• Semi-regulated mechanical mod with up to 80W unregulated output when the battery is fully charged
• Single battery: 18650, 20650, 20700 or 21700 (battery not included)
• Output voltage 3.2-4.2V
• Supports coil resistance from 0.08 to 3.0ohm
• 2ml silicone squonk bottle with a knurled Delrin cap, sitting on a magnetic cap
• Zinc alloy body with a special rubber coating
• Screenless design with an LED indicator for charging and protection status
• Dimensions: 60.5 x 27.0 x 90.0mm
• Maximum charging current 2A

The chipset covers short circuit, low voltage, overheating, reverse battery, overcharging and over-discharge, plus a 10-second auto cut-off on the fire button. These protections sit alongside the mechanical-style output, but this is still an unregulated device, so you need to know your build and your battery. The fire button also switches the mod on and off with five clicks. The curved body is finished in rubber coating for a smooth grip, and the indicator light sits inside the squonk bottle area.

What's in the box

• 1 x Recurve Squonk Mod
• 1 x User manual
• 1 x USB charging cable
• 2 x Battery adapters

No battery is supplied, and no atomiser is included.

Compatibility

The mod takes a single 18650, 20650, 20700 or 21700 battery. 20700 and 21700 cells fit without any adapter, while 18650 and 20650 cells need the supplied battery adapters. The gold-plated 510 connector accepts RDAs up to 26mm in diameter, and the Recurve RDA and Recurve Dual RDA are the recommended pairings.

Choosing your colour

The Recurve squonk mod comes in three colours: Black, Red and White. The specification is the same whichever you pick.

How to use

1. Fit a charged battery, using the supplied adapters if it is an 18650 or 20650.
2. Fit a suitable RDA to the 510 connector and check your coil resistance is within the supported range.
3. Fill the squonk bottle with e-liquid, then squeeze it to feed the coil. Let the wick soak before first use.
4. Five clicks of the fire button switches the mod on or off.

FAQs

Is a battery included?

No. You need to supply one 18650, 20650, 20700 or 21700 battery. Adapters for 18650 and 20650 cells come in the box.

How big is the squonk bottle?

The UK version has a 2ml silicone squonk bottle.

Is this a regulated mod?

It is a semi-regulated mechanical mod with an unregulated output of up to 80W. It has built-in protections, but it is intended for experienced users who understand Ohm's Law.

What atomiser should I use?

The 510 connector accepts RDAs up to 26mm in diameter. Wotofo recommends the Recurve RDA and Recurve Dual RDA.

How do I turn it on and off?

Click the fire button five times.