Wotofo Recurve V2 RDA - 22.2mm Deck, Dual or Single Coil

The Wotofo Recurve V2 RDA is a rebuildable dripper made in collaboration with YouTuber Mike Vapes. It has a 22.2mm build deck, takes dual or single coil builds and suits experienced vapers who like to build their own coils and tune the setup to their taste.

Key features

• 22.2mm deck diameter, 24.6mm RDA diameter
• Dual coil build with two 3 mm ID coils, or a single coil build
• Two airflow adapters, one for dual builds and one for single builds
• Curved drip top and body design
• Stainless steel body with German PEEK insulator
• 810 Delrin drip tip and 510 thread
• Drip or squonk juice feeding
• Height of 35.55mm including drip tip and 510 pin

This Wotofo Recurve V2 RDA is designed around flavour. The two airflow adapters work with the slot-honeycomb to direct air onto the coil, and the curved adapter forms a reduced chamber. You adjust airflow with a twist of the adapter that suits your build, so you can set it up to your preference.

What's in the box

• Recurve V2 RDA x 1
• 5 mm ID Dual Core Fused Clapton coil, 0.65 ohm x 1
• 5 mm thick cotton strip x 1
• 3 mm ID Framed Staple Clapton coil, 0.32 ohm x 2
• 3 mm thick cotton strip x 2
• Airflow adapter x 2
• 5 mm coiling rod x 1
• Cross head screwdriver x 1
• Allen key x 1
• Accessory bag x 1
• User manual x 1

Compatibility

The RDA uses a standard 510 thread. It is designed for wire coil builds: two 3 mm ID coils for a dual build, or a single coil build.

Choosing your colour

The Recurve V2 RDA is available in six colours: Black, Blue, Gold, Gun Metal, Rainbow and Stainless Steel. Pick whichever suits your mod.

How to use

1. Fit your coil or coils to the deck and tighten the screws.
2. Pulse the coils with a compatible device to check they heat evenly, and adjust if needed.
3. Thread the wick through the coil, trim it and tuck the ends in.
4. Wet the wick with e-liquid, fit the correct airflow adapter for your build and replace the top cap.
5. Check the resistance on your device before firing, and keep the wick topped up while you vape.

FAQs

Can I use a single coil in the Recurve V2?

Yes. It supports both dual and single coil builds, and comes with two airflow adapters so you can match the airflow to the build.

Does it come with coils?

Yes. The box includes one 5 mm ID Dual Core Fused Clapton coil at 0.65 ohm and two 3 mm ID Framed Staple Clapton coils at 0.32 ohm, plus wicking strips.

Can I squonk with it?

The RDA is listed for both drip and squonk feeding.

What thread does it use?

It has a 510 thread.