Wotofo STNG 22mm MTL RDA - Single Coil Rebuildable Atomiser

The Wotofo STNG MTL RDA is a 22mm single coil rebuildable dripping atomiser built for mouth-to-lung vaping. It was co-designed with YouTube reviewer Vapor Place (Uncle Stas), and it suits anyone who wants a compact RDA for nic salt or standard e-liquid and is comfortable building their own coils.

Key features

• 22mm diameter, single coil build deck
• Narrow MTL drip tip with 510 connection
• Droplet-shaped airflow inlet on one side of the top cap
• Dual airflow channels leading to the centre of the coil
• Spring-loaded, T-shaped post clamps
• Bottom feed (squonk) capable, or drip with the tip removed
• Stainless steel body with German PEEK insulator
• Overall height 43.15mm with drip tip and 510 pin

The airflow inlet sits on one side only, but the air is routed through two channels straight to the middle of the coil. You can adjust the inlet to set the draw to your liking. The T-shaped clamps make it easier to fit coils in different orientations, and you only need to loosen the screws slightly to open them rather than remove them.

Two drip tips of different diameters come in the pack, so you can choose whichever feels better. The recommended wattage range is 5-30W and the recommended resistance range is 0.4-1.8ohm.

What's in the box

• 1 x STNG MTL RDA
• 1 x Dual Core Fused Clapton coil (Ni80 30G*2+38G, 0.75ohm, 2.5mm inner diameter, 6 wraps)
• 1 x Single-Strand coil (Ni80 28G, 1.2ohm, 2.5mm inner diameter, 9 wraps)
• 1 x extra drip tip
• 1 x cotton strip
• 1 x cross head screwdriver
• 1 x Allen key
• 1 bag of O-rings
• 1 x user manual

The Dual Core Fused Clapton coil is recommended for normal nicotine vaping, and the Single-Strand coil is recommended for nic salts.

Choosing your colour

The STNG is available in Black, Blue, Gold, Gun Metal, Rainbow and Stainless Steel. The specifications are the same whichever you choose.

How to use

1. Fit your coil to the posts, tighten the clamps and trim the leads.
2. Thread the wick through the coil and trim it so it sits neatly in the deck.
3. Wet the wick with e-liquid before firing so it is fully soaked.
4. Either drip e-liquid onto the wick with the drip tip removed, or use a squonk mod to feed from the bottom.
5. Fit the drip tip, set the airflow inlet and start at a low wattage, working up within the recommended range.

FAQs

Can I squonk the Wotofo STNG?

Yes. It has bottom feed capability, so it can be used with a squonk mod. You can also drip directly onto the wick by removing the drip tip.

Which coil should I use with nic salts?

The included Single-Strand coil (1.2ohm) is the one recommended for nic salts. The Dual Core Fused Clapton coil (0.75ohm) is recommended for normal nicotine vaping.

Does it come with coils?

Yes, two coils are included, along with a cotton strip, two drip tips and the tools needed to fit them.

What size is the STNG?

The build deck is 22mm in diameter, and the overall height is 43.15mm including the drip tip and 510 pin. It uses a 510 thread.